| 📁 files |
— |
2026-03-16 |
| 📄 config.json |
19.1 KB |
2026-03-09 |
| 📄 config.yaml |
16.4 KB |
2026-03-09 |
| 📄 Face maske Image cropped.jpg |
103.5 KB |
2026-03-09 |
| 📄 Face_maske_Image_cropped.jpg |
103.5 KB |
2026-03-09 |
| 📄 index.mdx |
3.9 KB |
2026-03-09 |
| 📄 Precious Plastic 3D-Printing Files.zip |
3.3 MB |
2026-03-09 |
| 📄 precious_plastic_3d-printing_files.zip |
3.3 MB |
2026-03-09 |
| 📄 README.md |
3.7 KB |
2026-03-09 |
| 📄 references.md |
1.2 KB |
2026-03-09 |
| 📄 resources.md |
912 B |
2026-03-09 |
| 📄 Step - get elastic Band.PNG |
76.8 KB |
2026-03-16 |
| 📄 Step 0- How to make a Face Shield.PNG |
76.6 KB |
2026-03-16 |
| 📄 Step 3 pepare bottle bottom part.PNG |
46.5 KB |
2026-03-16 |
| 📄 Step 3-Prapare bottle 3 cut allong the middle.PNG |
61.2 KB |
2026-03-16 |
| 📄 Step 3-prapare bottle.PNG |
62.9 KB |
2026-03-16 |
| 📄 Step 4 - Hot fuse.PNG |
66.7 KB |
2026-03-16 |
| 📄 Step 4- Connect bottom part.PNG |
64.9 KB |
2026-03-16 |
| 📄 Step 4- Connect top part.PNG |
50.4 KB |
2026-03-16 |
| 📄 Step 5 cutting.PNG |
68.5 KB |
2026-03-16 |
| 📄 Step 5 Use Nail sissors.PNG |
74.1 KB |
2026-03-16 |
| 📄 step 6 - attached band.PNG |
52.7 KB |
2026-03-16 |
| 📄 Step 6 attach Elastic Band.PNG |
62.4 KB |
2026-03-16 |
| 📄 Step 7 desinfecting.PNG |
66.9 KB |
2026-03-16 |
| 📄 step_-_get_elastic_band.png |
76.8 KB |
2026-03-09 |
| 📄 step_0-_how_to_make_a_face_shield.png |
76.6 KB |
2026-03-09 |
| 📄 step_3_pepare_bottle_bottom_part.png |
46.5 KB |
2026-03-09 |
| 📄 step_3-prapare_bottle_3_cut_allong_the_middle.png |
61.2 KB |
2026-03-09 |
| 📄 step_3-prapare_bottle.png |
62.9 KB |
2026-03-09 |
| 📄 step_4_-_hot_fuse.png |
66.7 KB |
2026-03-09 |
| 📄 step_4-_connect_bottom_part.png |
64.9 KB |
2026-03-09 |
| 📄 step_4-_connect_top_part.png |
50.4 KB |
2026-03-09 |
| 📄 step_5_cutting.png |
68.5 KB |
2026-03-09 |
| 📄 step_5_use_nail_sissors.png |
74.1 KB |
2026-03-09 |
| 📄 step_6_-_attached_band.png |
52.7 KB |
2026-03-09 |
| 📄 step_6_attach_elastic_band.png |
62.4 KB |
2026-03-09 |
| 📄 step_7_desinfecting.png |
66.9 KB |
2026-03-09 |
| 📄 Step1-Print Parts.PNG |
75.8 KB |
2026-03-16 |
| 📄 Step1-Print_Parts.PNG |
75.8 KB |
2026-03-16 |
| 📄 Step1-Printed parts design 1.PNG |
66.2 KB |
2026-03-16 |
| 📄 Step1-Printed_parts_design_1.PNG |
66.2 KB |
2026-03-16 |
