Steton - Puma 39

4500,- Euro # Steton Puma 39 — sliding table / panel saw **Steton** (Italy) builds the **Puma** line of circular squaring / sliding-table panel saws. The digit in names such as **Puma B 3200** usually refers to **carriage / table length in millimetres**; **Puma 39** is therefore commonly interpreted as a **~3900 mm** sliding-table variant within the same family. Confirm the exact configuration on the machine nameplate and Steton or dealer documentation. Public distributor copy for the **Puma** (not B/S sub-series) line describes the following ([N-M-O — Steton saws](http://n-m-o.com/STETON/info_SAWS.htm)): ## Puma series — typical design (Steton / distributor) | Item | Specification | | --- | --- | | Main blade | Tilting blade, **max. Ø 400 mm** | | Scoring | Scoring saw with **independent motor**; electric adjustment of main blade **height** and **angle**; electric adjustment of scoring blade **height** and **alignment**; scorer typically rests under the table and **rises pneumatically** when started | | Carriage | Anodized aluminium, **width 400 mm**; length typically **2600 mm up to 4300 mm** (configurable); slides on **round hardened steel bars**; lockable in position | | Saw unit | Long shaft with widely spaced bearings for stability | | Table | Eccentric clamp arm, additional table with mitre gauge (often ±45°), support frame on swivelling arm with telescopic extension (often standard) | Typical **options** (series, not specific to “39”): swinging control board, electronic parallel fence, electronic programmer (fence + main/scoring adjustments), postforming cycle, powered carriage, extra squaring table, lengthwise pressure, trigonometric goniometer, laser, automatic star–delta starters, readouts on fences, uprated motors, etc. ## Figures from one used-machine listing (“Puma 39”) A marketplace spec block for **Steton Puma 39** (used machine, Italy, year 2000) lists the following ([Exapro](https://www.exapro.com/sp/steton-puma39-22819/)). Treat as **indicative**; several values disagree with the usual Puma series carriage range above (e.g. **1200 mm** carriage vs **2600–4300 mm**), so **verification on the actual machine** is recommended. | Item | Listed value | | --- | --- | | Carriage length | 1200 mm | | Max. cutting width | 700 mm | | Max. blade Ø | 400 mm | | Blade speed | 5000 rpm | | Blade tilting | 90° *(listing field — typical Puma line uses **0°–45°** main-blade tilt; confirm)* | | Motor power | 4.1 kW | | Weight | 1100 kg | ## References - [N-M-O — Steton panel saws (Puma / Puma B / Puma S)](http://n-m-o.com/STETON/info_SAWS.htm) - [WOOD TEC PEDIA — STETON PUMA (brochure links)](https://wtp.hoechsmann.com/en/lexikon/55297/puma) - [Exapro — Steton Puma 39 listing (example specs)](https://www.exapro.com/sp/steton-puma39-22819/)