## Mould - Cassandra - 650

### 

### General

width : 640
mould frame thickness : 15mm - square

### 

### Top / Bottom Sheet



thickness : 2mm

### 

### Flanges

* 3 each side, for M6 bolts, M7 bore (tolerance / clearance due to bending)
* slot to ease hand bending
* flange width : 20mm
* distribution : 25% from the corner, one at the center
* the upper sheet has its flanges offset - choose a good distance :)

### 

### Mould Frame

### 

### holes - sides

* one for assembly, each end
* next, 35mm away : bearing mounts (M8 bolts), each end
* flange mounts, M6
* venting / overflow holes, closable, M8 bolts, also 2 each end

### 

### holes - top

* we will use M8 dowel pins to stack up mould frames, we'd need one pin in every corner, but also one in the center