dim swApp
dim storePath
dim docVisible
Private Const MAX_PATH = 260
'Directories only
Private Const BIF_RETURNONLYFSDIRS = &H1&
'Windows 2000 (Shell32.dll 5.0) extended dialog
Private Const BIF_NEWDIALOGSTYLE = &H40
' show edit box
Private Const BIF_EDITBOX = &H10&
' add all dir options
Private Const BIF_BrowseFolder = BIF_EDITBOX  Or BIF_RETURNONLYFSDIRS Or BIF_NEWDIALOGSTYLE
' set the virtual desktop as  ini folder 
Private Const IniFolder = &H0 'Virtual Desktop
Function getLastFeatureByType(model,typ)  
  Set feat = model.FirstFeature ' Get the 1st feature in part
  Set res = Nothing
  Count = 0
  Do While Not feat Is Nothing ' While we have a valid feature
    If feat.GetTypeName() = typ Then
      Set res = feat
    End If
    Set feat = feat.GetNextFeature() ' Get the next feature
  Loop ' Continue until no more
  Set getLastFeatureByType = res
End Function
' this code with copy a matrix to a other
Function copyMat4x4(source)
Dim res(0 To 15) As Double
For i = 0 To 15
 res(i) = source(i)
Next
copyMat4x4 = res
End Function

' This code creates a mat from a sw mat
Function createMatFromSWMat(source)
 Dim res(0 To 15) As Double
 res(0) = source(0)
 res(1) = source(1)
 res(2) = source(2)
 res(3) = 0
 res(4) = source(3)
 res(5) = source(4)
 res(6) = source(5)
 res(7) = 0
 res(8) = source(6)
 res(9) = source(7)
 res(10) = source(8)
 res(11) = 0
 res(12) = source(9)
 res(13) = source(10)
 res(14) = source(11)
 res(15) = source(12)
 createMatFromSWMat = res
End Function
Function createSWMatFromMat(source)
 Dim res(0 To 15) As Double
 res(0) = source(0)
 res(1) = source(1)
 res(2) = source(2)
 res(3) = source(4)
 res(4) = source(5)
 res(5) = source(6)
 res(6) = source(8)
 res(7) = source(9)
 res(8) = source(10)
 res(9) = source(12)
 res(10) = source(13)
 res(11) = source(14)
 res(12) = source(15)
 res(13) = 0
 res(14) = 0
 res(15) = 0
 createSWMatFromMat = res
End Function
Function createMat4x4FromValues(x1,x2,x3,y1,y2,y3,z1,z2,z3,t1,t2,t3)
 Dim res(0 To 15) As Double
 res(0) = x1
 res(1) = x2
 res(2) = x3
 res(3) = 0
 res(4) = y1
 res(5) = y2
 res(6) = y3
 res(7) = 0
 res(8) = z1
 res(9) = z2
 res(10) =z3
 res(11) = 0
 res(12) = t1
 res(13) = t2
 res(14) = t3
 res(15) = 1
 createMat4x4FromValues = res
End Function
' this code will mult a common mat with any other stuff
Function multMatMat(ld, xld, yld, rd, xrd, yrd)
  mulRes = yld * xrd
  'Dim od(0 To 0) As Variant
  ReDim od(mulRes - 1) As Double
  For i = 0 To mulRes - 1
   od(i) = 0#
  Next
  y = 0
  While y < yld
    x = 0
    While x < xrd
      i = 0
      While i < xld
       od(x * yld + y) = od(x * yld + y) + ld(i * yld + y) * rd(x * yrd + i)
       i = i + 1
      Wend
      x = x + 1
    Wend
    y = y + 1
  Wend
  multMatMat = od

End Function
' this code will mult a vector with a matrix
Function mulMat4x4Values3d(mat, x,y,z)
  tmp = createVec4d(x, y, z, 1)
  res = multMatMat(mat, 4, 4, tmp, 1, 3)
  mulMat4x4Values3d = createVec3d(res(0), res(1), res(2))
End Function
Function mulMat4x4Vec3d(mat, vec)
  tmp = createVec4d(vec(0), vec(1), vec(2), 1)
  res = multMatMat(mat, 4, 4, tmp, 1, 3)
  mulMat4x4Vec3d = createVec3d(res(0), res(1), res(2))
End Function
Function mulMat4x4Mat4x4(mat1, mat2)
  mulMat4x4Mat4x4 = multMatMat(mat1, 4, 4, mat2, 4, 4)
End Function
' create a 4x4 matrix
Function createMat4x4()
 Dim res(0 To 15) As Double
 for i = 0 to 15 
 res(i) = 0
 next
 createMat4x4 = res
End Function
Function createMat4x4Ident()
 Dim res(0 To 15) As Double
 res(0) = 1
 res(5) = 1
 res(10) = 1
 res(15) = 1
 res(1) = 0
 res(2) = 0
 res(3) = 0
 res(4) = 0
 res(6) = 0
 res(7) = 0
 res(8) = 0
 res(9) = 0
 res(11) = 0
 res(12) = 0
 res(13) = 0
 res(14) = 0
 createMat4x4Ident = res
End Function
' this function create a new vector
Function createVec3d(x, y, z)
 Dim res(0 To 2) As Double
 res(0) = x
 res(1) = y
 res(2) = z
 createVec3d = res
End Function
' this function create a new vector
Function createVec4d(x, y, z, w)
 Dim res(0 To 3) As Double
 res(0) = x
 res(1) = y
 res(2) = z
 res(3) = w
 createVec4d = res
End Function

Function getMatTVec(mat)
 getMatTVec = createVec3d(mat(12), mat(13), mat(14))
End Function

Sub setMatTVec(mat, v)
 mat(12) = v(0)
 mat(13) = v(1)
 mat(14) = v(2)
End Sub
Sub setMatXVec(mat, v)
 mat(0) = v(0)
 mat(1) = v(1)
 mat(2) = v(2)
End Sub
Sub setMatYVec(mat, v)
 mat(4) = v(0)
 mat(5) = v(1)
 mat(6) = v(2)
End Sub
Sub setMatZVec(mat, v)
 mat(8) = v(0)
 mat(9) = v(1)
 mat(10) = v(2)
End Sub
Sub setMatScale(mat, s)
 mat(15) = s
End Sub
Function getMatXVec(mat)
 getMatXVec = createVec3d(mat(0), mat(1), mat(2))
End Function
Function getMatYVec(mat)
 getMatYVec = createVec3d(mat(4), mat(5), mat(6))
End Function
Function getMatZVec(mat)
 getMatZVec = createVec3d(mat(8), mat(9), mat(10))
End Function

Function negVec3d(v)
 negVec3d = createVec3d(-v(0), -v(1), -v(2))
End Function
Function scaleVec3d(v,s)
 scaleVec3d = createVec3d(v(0)*s,v(1)*s,v(2)*s)
End Function
' invert a 4x4 matrix
Function invMat4x4(source)
target = copyMat4x4(source)
setMatTVec target, createVec3d(0, 0, 0)
 target(1) = source(4)
 target(4) = source(1)
 target(2) = source(8)
 target(8) = source(2)
 target(6) = source(9)
 target(9) = source(6)
 setMatScale target,1
 t = getMatTVec(source)
 v = mulMat4x4Vec3d(target, t)
 setMatTVec target, negVec3d(v)
 invMat4x4 = target
End Function
Function IsEqual(argVec3DA, argVec3DB)
  For i = 0 To 2
    If( argVec3DA(i) <> argVec3DB(i) ) Then
      Exit For
    End If
  Next
  If(i = 3) Then
    IsEqual = 1
  Else
    IsEqual = 0
  End If
End Function
Function getFaceFromModel(part, pos, normal)
 Dim partBodies As Variant
 partBodies = part.GetBodies(swSolidBody)
 For k = LBound(partBodies) To UBound(partBodies)
   found = 0
   Dim body As Object
   Set body = partBodies(k)
   Set face = body.GetFirstFace()
   Set getFaceFromModel = nothing
   minDist = -1
   Do While Not face Is Nothing ' While we have a valid feature
     Set sur = face.GetSurface()
     If sur.IsPlane() Then
       planePara = sur.PlaneParams
       faceNormal = face.normal
       nTest = faceNormal(0) * normal(0) + faceNormal(1) * normal(1) + faceNormal(2) * normal(2)
       If nTest > 1 - 0.000001 Then
         ' check projection
         closeRes = face.GetClosestPointOn(pos(0), pos(1), pos(2))
         dTest = (pos(0) - closeRes(0)) * (pos(0) - closeRes(0)) + (pos(1) - closeRes(1)) * (pos(1) - closeRes(1)) + (pos(2) - closeRes(2)) * (pos(2) - closeRes(2))
         If ( dTest < minDist Or minDist = -1 ) Then
           Set getFaceFromModel = face
           minDist = dTest
           found=1
         End If
       End If
     else
       If sur.IsCylinder() then
         closeRes = face.GetClosestPointOn(pos(0), pos(1), pos(2))
         dTest = (pos(0) - closeRes(0)) * (pos(0) - closeRes(0)) + (pos(1) - closeRes(1)) * (pos(1) - closeRes(1)) + (pos(2) - closeRes(2)) * (pos(2) - closeRes(2))
         If ( dTest < minDist Or minDist = -1 ) Then
           res=sur.EvaluateAtPoint(closeRes(0),closeRes(1),closeRes(2))
           nTest=res(0)*normal(0)+res(1)*normal(1)+res(2)*normal(2)
           if nTest>1-0.00000001 then
             Set getFaceFromModel = face
             found=1
           End if
         End if
       End if
     End if
     Set face = face.GetNextFace ' Get the next Face
   Loop
   If (found = 1) Then
     Exit For
   End If
 Next k
End Function
Function getEdgeFromModel(part, pos,byref edgeRet)
 Dim partBodies As Variant
 partBodies = part.GetBodies(swSolidBody)
 For k = LBound(partBodies) To UBound(partBodies)
   Dim body As Object
   Set body = partBodies(k)
   edges= body.GetEdges()
   start= LBound(edges)
   ende = UBound(edges)
   For i = start To ende
     Set edge = edges(i)
     closeRes=edge.GetClosestPointOn(pos(0),pos(1),pos(2))
     dTest = (pos(0) - closeRes(0)) * (pos(0) - closeRes(0)) + (pos(1) - closeRes(1)) * (pos(1) - closeRes(1)) + (pos(2) - closeRes(2)) * (pos(2) - closeRes(2))
     If dTest < 0.00000001 Then
       set edgeRet=edge
       getEdgeFromModel=true
       exit function
     End If
   Next i
 Next k
 getEdgeFromModel=false
End Function
sub cLn(part,wMat,x1,y1,x2,y2)
pk1=mulMat4x4Values3d(wMat,x1,y1,0)
pk2=mulMat4x4Values3d(wMat,x2,y2,0)
Part.SketchManager.CreateLine pk1(0),pk1(1),0,pk2(0),pk2(1),0
end sub
sub cCLn(part,wMat,x1,y1,x2,y2)
pk1=mulMat4x4Values3d(wMat,x1,y1,0)
pk2=mulMat4x4Values3d(wMat,x2,y2,0)
Part.CreateCenterLineVB pk1(0),pk1(1),0,pk2(0),pk2(1),0
end sub
sub cArc(part,wMat,x1,y1,x2,y2,x3,y3)
pk1=mulMat4x4Values3d(wMat,x1,y1,0)
pk2=mulMat4x4Values3d(wMat,x2,y2,0)
pk3=mulMat4x4Values3d(wMat,x3,y3,0)
Part.SketchManager.Create3PointArc pk1(0),pk1(1),0,pk3(0),pk3(1),0,pk2(0),pk2(1),0
end sub
sub cCir(part,wMat,x1,y1,rad)
pk1=mulMat4x4Values3d(wMat,x1,y1,0)
Part.SketchManager.CreateCircleByRadius pk1(0),pk1(1),0,rad
end sub
Public Function  BrowseForFolder
Dim objFolder, objShell
Set objShell = CreateObject("Shell.Application")
Set objFolder = objShell.BrowseForFolder(0, "Please select the folder..", BIF_BrowseFolder, IniFolder)
If Not (objFolder Is Nothing) Then
		BrowseForFolder = objFolder.Self.path
End If
End Function
Sub SelectCommonEdge(argFaceA, argFaceB)
  edgesA = argFaceA.GetEdges
  edgesB = argFaceB.GetEdges
  For Each edgeA In edgesA
    Set vertexA1 = edgeA.GetStartVertex
    Set vertexA2 = edgeA.GetEndVertex
    pointA1 = vertexA1.GetPoint
    pointA2 = vertexA2.GetPoint
    For Each edgeB In edgesB
      Set vertexB1 = edgeB.GetStartVertex
      Set vertexB2 = edgeB.GetEndVertex
      pointB1 = vertexB1.GetPoint
      pointB2 = vertexB2.GetPoint
      If ( (IsEqual(pointA1, pointB1) And IsEqual(pointA2, pointB2)) Or (IsEqual(pointA1, pointB2) And IsEqual(pointA2, pointB1)) ) Then
        edgeA.Select(True)
        Exit Sub
      End If
    Next
  Next
End Sub
Sub CreatePart0
dim errors as long
dim warnings as long
Dim longstatus As Long
if (docVisible=0) then
 swApp.DocumentVisible 0, 1
end if
set res=swApp.OpenDoc6 ( storePath & "SBR20UU.sldprt",1,3,"", errors, warnings)
swApp.ActivateDoc2 "SBR20UU.sldprt", False, longstatus
if not res is nothing then
 if (docVisible=0) then
  swApp.DocumentVisible 1, 1
 end if
 exit sub
end if
if (docVisible=0) then
 swApp.DocumentVisible 1, 1
end if
Dim sPartTemplateName As String
sPartTemplateName = swApp.GetUserPreferenceStringValue(8)
Set part = swApp.NewDocument(sPartTemplateName, 0, 0, 0)
swApp.ActivateDoc2 "SBR20UU.sldprt", False, longstatus
Set part = swApp.ActiveDoc
part.SketchManager.AddToDB = true
part.SketchManager.DisplayWhenAdded = false
part.ActiveView.EnableGraphicsUpdate = false
Set modelExt = part.Extension
Set customPropMgr = modelExt.CustomPropertyManager("")
customPropMgr.Add2 "NB", 30, "SBR20UU"
customPropMgr.Add2 "NN", 30, "SBR"
customPropMgr.Add2 "NT", 30, "Linear Motion Ball Bearing Slide Units"
customPropMgr.Add2 "NBSYN", 30, "$CNSTYPECODE."
customPropMgr.Add2 "LINA", 30, "SBR20UU"
customPropMgr.Add2 "CATALOG", 30, "YTP"
customPropMgr.Add2 "MODEL", 30, "SBR20UU"
customPropMgr.Add2 "IB", 30, "LM20UU-OP"
customPropMgr.Add2 "SD", 30, "20"
customPropMgr.Add2 "H", 30, "23"
customPropMgr.Add2 "E", 30, "24.0"
customPropMgr.Add2 "W", 30, "48"
customPropMgr.Add2 "L", 30, "50"
customPropMgr.Add2 "F", 30, "39.0"
customPropMgr.Add2 "T", 30, "11.0"
customPropMgr.Add2 "HH1", 30, "10.0"
customPropMgr.Add2 "ANG", 30, "60°"
customPropMgr.Add2 "B", 30, "35.0"
customPropMgr.Add2 "C", 30, "35"
customPropMgr.Add2 "S", 30, "M6"
customPropMgr.Add2 "I", 30, "12"
customPropMgr.Add2 "CC", 30, "88"
customPropMgr.Add2 "CO", 30, "140"
customPropMgr.Add2 "WEIGHT", 30, "0.200"
customPropMgr.Add2 "PS", 30, "GBT/16940-2012"
customPropMgr.Add2 "MAT1", 30, "6063 Aluminium Alloy"
customPropMgr.Add2 "TS1", 30, "Natural Anodic Oxidation (Conventional)"
customPropMgr.Add2 "TS2", 30, "Black Anodic Oxidation Treatment (Customized)"
customPropMgr.Add2 "TEMPERATUER", 30, "-20~80"
customPropMgr.Add2 "SUPPLIER", 30, "YTP"
customPropMgr.Add2 "ARTICLENO", 30, "SBR20UU"
customPropMgr.Add2 "BOMINFO", 30, "SBR20UU"
customPropMgr.Add2 "CREATOR", 30, "CADENAS GmbH"
customPropMgr.Add2 "IsFastener", 30, "0"
part.SummaryInfo(0)="SBR20UU"
part.SummaryInfo(4)="Linear Motion Ball Bearing Slide Units"
part.SummaryInfo(2)="Cadenas PARTsolutions"
valRGB=part.MaterialPropertyValues
valRGB(0)=0.75
valRGB(1)=0.75
valRGB(2)=0.75
valRGB(7)=0
part.MaterialPropertyValues=valRGB
Dim featMgr as object
set featMgr = part.FeatureManager
codeBag0 part,featMgr
part.ActiveView.EnableGraphicsUpdate = true
part.SketchManager.DisplayWhenAdded = true
part.SketchManager.AddToDB = false
part.EditRebuild3
part.Rebuild swRebuildAll
Set modelExt = part.Extension
modelExt.SaveAs storePath & "SBR20UU.sldprt",0,0,nothing,errors,warnings
End Sub
sub codeBag1(part,wMat)
cLn part,wMat,-0.024,0.022,-0.024,0.012
cLn part,wMat,-0.024,0.012,-0.0225,0.0105
cLn part,wMat,-0.0225,0.0105,-0.0225,-0.0144
cLn part,wMat,-0.0225,-0.0144,-0.0215,-0.0154
cLn part,wMat,-0.0215,-0.0154,-0.0095840144685478,-0.0154
cLn part,wMat,-0.0095840144685478,-0.0154,-0.0055106071276578,-0.0083446515256545
cArc part,wMat,-0.0055106071276578,-0.0083446515256545,3.9497954175685e-18,0.01,0.0055106071276578,-0.0083446515256545
cLn part,wMat,0.0055106071276578,-0.0083446515256545,0.0095840144685478,-0.0154
cLn part,wMat,0.0095840144685478,-0.0154,0.0215,-0.0154
cLn part,wMat,0.0215,-0.0154,0.0225,-0.0144
cLn part,wMat,0.0225,-0.0144,0.0225,0.0105
cLn part,wMat,0.0225,0.0105,0.024,0.012
cLn part,wMat,0.024,0.012,0.024,0.022
cLn part,wMat,0.024,0.022,0.023,0.023
cLn part,wMat,0.023,0.023,0.0105,0.023
cLn part,wMat,0.0105,0.023,0.0095,0.022
cLn part,wMat,0.0095,0.022,-0.0095,0.022
cLn part,wMat,-0.0095,0.022,-0.0105,0.023
cLn part,wMat,-0.0105,0.023,-0.023,0.023
cLn part,wMat,-0.023,0.023,-0.024,0.022
Part.SketchManager.InsertSketch True
end sub

sub codeBag2(part,wMat)
cLn part,wMat,-0.0215,-0.016,-0.009237604307034,-0.016
cLn part,wMat,-0.009237604307034,-0.016,-0.005,-0.0086602540378444
cArc part,wMat,-0.005,-0.0086602540378444,-0.00525767218305,-0.0085062849244298,-0.0055106071276578,-0.0083446515256545
cLn part,wMat,-0.0055106071276578,-0.0083446515256545,-0.0095840144685478,-0.0154
cLn part,wMat,-0.0095840144685478,-0.0154,-0.0215,-0.0154
cLn part,wMat,-0.0215,-0.0154,-0.0215,-0.016
Part.SketchManager.InsertSketch True
end sub

sub codeBag3(part,wMat)
cLn part,wMat,0.005,-0.0086602540378444,0.009237604307034,-0.016
cLn part,wMat,0.009237604307034,-0.016,0.0215,-0.016
cLn part,wMat,0.0215,-0.016,0.0215,-0.0154
cLn part,wMat,0.0215,-0.0154,0.0095840144685478,-0.0154
cLn part,wMat,0.0095840144685478,-0.0154,0.0055106071276578,-0.0083446515256545
cArc part,wMat,0.0055106071276578,-0.0083446515256545,0.00525767218305,-0.0085062849244298,0.005,-0.0086602540378444
Part.SketchManager.InsertSketch True
end sub

sub codeBag4(part,wMat)
cCir part,wMat,0.0175,0.0175,0.0025
cLn part,wMat,0.0155,0.017,0.016633974596216,0.017
cArc part,wMat,0.016633974596216,0.017,0.016792893218813,0.016792893218813,0.017,0.016633974596216
cLn part,wMat,0.017,0.016633974596216,0.017,0.0155
cLn part,wMat,0.017,0.0155,0.018,0.0155
cLn part,wMat,0.018,0.0155,0.018,0.016633974596216
cArc part,wMat,0.018,0.016633974596216,0.018207106781187,0.016792893218813,0.018366025403784,0.017
cLn part,wMat,0.018366025403784,0.017,0.0195,0.017
cLn part,wMat,0.0195,0.017,0.0195,0.018
cLn part,wMat,0.0195,0.018,0.018366025403784,0.018
cArc part,wMat,0.018366025403784,0.018,0.018207106781187,0.018207106781187,0.018,0.018366025403784
cLn part,wMat,0.018,0.018366025403784,0.018,0.0195
cLn part,wMat,0.018,0.0195,0.017,0.0195
cLn part,wMat,0.017,0.0195,0.017,0.018366025403784
cArc part,wMat,0.017,0.018366025403784,0.016792893218813,0.018207106781187,0.016633974596216,0.018
cLn part,wMat,0.016633974596216,0.018,0.0155,0.018
cLn part,wMat,0.0155,0.018,0.0155,0.017
Part.SketchManager.InsertSketch True
end sub

sub codeBag5(part,wMat)
cCir part,wMat,0.0175,-0.0175,0.0025
cLn part,wMat,0.0155,-0.017,0.0155,-0.018
cLn part,wMat,0.0155,-0.018,0.016633974596216,-0.018
cArc part,wMat,0.016633974596216,-0.018,0.016792893218813,-0.018207106781187,0.017,-0.018366025403784
cLn part,wMat,0.017,-0.018366025403784,0.017,-0.0195
cLn part,wMat,0.017,-0.0195,0.018,-0.0195
cLn part,wMat,0.018,-0.0195,0.018,-0.018366025403784
cArc part,wMat,0.018,-0.018366025403784,0.018207106781187,-0.018207106781187,0.018366025403784,-0.018
cLn part,wMat,0.018366025403784,-0.018,0.0195,-0.018
cLn part,wMat,0.0195,-0.018,0.0195,-0.017
cLn part,wMat,0.0195,-0.017,0.018366025403784,-0.017
cArc part,wMat,0.018366025403784,-0.017,0.018207106781187,-0.016792893218813,0.018,-0.016633974596216
cLn part,wMat,0.018,-0.016633974596216,0.018,-0.0155
cLn part,wMat,0.018,-0.0155,0.017,-0.0155
cLn part,wMat,0.017,-0.0155,0.017,-0.016633974596216
cArc part,wMat,0.017,-0.016633974596216,0.016792893218813,-0.016792893218813,0.016633974596216,-0.017
cLn part,wMat,0.016633974596216,-0.017,0.0155,-0.017
Part.SketchManager.InsertSketch True
end sub

sub codeBag6(part,wMat)
cCir part,wMat,-0.0175,0.0175,0.0025
cLn part,wMat,-0.0195,0.018,-0.0195,0.017
cLn part,wMat,-0.0195,0.017,-0.018366025403784,0.017
cArc part,wMat,-0.018366025403784,0.017,-0.018207106781187,0.016792893218813,-0.018,0.016633974596216
cLn part,wMat,-0.018,0.016633974596216,-0.018,0.0155
cLn part,wMat,-0.018,0.0155,-0.017,0.0155
cLn part,wMat,-0.017,0.0155,-0.017,0.016633974596216
cArc part,wMat,-0.017,0.016633974596216,-0.016792893218813,0.016792893218813,-0.016633974596216,0.017
cLn part,wMat,-0.016633974596216,0.017,-0.0155,0.017
cLn part,wMat,-0.0155,0.017,-0.0155,0.018
cLn part,wMat,-0.0155,0.018,-0.016633974596216,0.018
cArc part,wMat,-0.016633974596216,0.018,-0.016792893218813,0.018207106781187,-0.017,0.018366025403784
cLn part,wMat,-0.017,0.018366025403784,-0.017,0.0195
cLn part,wMat,-0.017,0.0195,-0.018,0.0195
cLn part,wMat,-0.018,0.0195,-0.018,0.018366025403784
cArc part,wMat,-0.018,0.018366025403784,-0.018207106781187,0.018207106781187,-0.018366025403784,0.018
cLn part,wMat,-0.018366025403784,0.018,-0.0195,0.018
Part.SketchManager.InsertSketch True
end sub

sub codeBag7(part,wMat)
cCir part,wMat,-0.0175,-0.0175,0.0025
cLn part,wMat,-0.0195,-0.018,-0.018366025403784,-0.018
cArc part,wMat,-0.018366025403784,-0.018,-0.018207106781187,-0.018207106781187,-0.018,-0.018366025403784
cLn part,wMat,-0.018,-0.018366025403784,-0.018,-0.0195
cLn part,wMat,-0.018,-0.0195,-0.017,-0.0195
cLn part,wMat,-0.017,-0.0195,-0.017,-0.018366025403784
cArc part,wMat,-0.017,-0.018366025403784,-0.016792893218813,-0.018207106781187,-0.016633974596216,-0.018
cLn part,wMat,-0.016633974596216,-0.018,-0.0155,-0.018
cLn part,wMat,-0.0155,-0.018,-0.0155,-0.017
cLn part,wMat,-0.0155,-0.017,-0.016633974596216,-0.017
cArc part,wMat,-0.016633974596216,-0.017,-0.016792893218813,-0.016792893218813,-0.017,-0.016633974596216
cLn part,wMat,-0.017,-0.016633974596216,-0.017,-0.0155
cLn part,wMat,-0.017,-0.0155,-0.018,-0.0155
cLn part,wMat,-0.018,-0.0155,-0.018,-0.016633974596216
cArc part,wMat,-0.018,-0.016633974596216,-0.018207106781187,-0.016792893218813,-0.018366025403784,-0.017
cLn part,wMat,-0.018366025403784,-0.017,-0.0195,-0.017
cLn part,wMat,-0.0195,-0.017,-0.0195,-0.018
Part.SketchManager.InsertSketch True
end sub

sub codeBag8(part,wMat)
cLn part,wMat,-0.0175,0.023,-0.0145,0.023
cLn part,wMat,-0.0145,0.023,-0.0150415,0.0224585
cLn part,wMat,-0.0150415,0.0224585,-0.0150415,0.011
cLn part,wMat,-0.0150415,0.011,-0.0175,0.011
cLn part,wMat,-0.0175,0.011,-0.0175,0.023
cCLn part,wMat,-0.0175,0.011,-0.0175,0.023
Part.SketchManager.InsertSketch True
end sub

sub codeBag9(part,wMat)
cLn part,wMat,-0.0175,0.023,-0.0145,0.023
cLn part,wMat,-0.0145,0.023,-0.0150415,0.0224585
cLn part,wMat,-0.0150415,0.0224585,-0.0150415,0.011
cLn part,wMat,-0.0150415,0.011,-0.0175,0.011
cLn part,wMat,-0.0175,0.011,-0.0175,0.023
cCLn part,wMat,-0.0175,0.011,-0.0175,0.023
Part.SketchManager.InsertSketch True
end sub

sub codeBag10(part,wMat)
cLn part,wMat,-0.0175,0.023,-0.0145,0.023
cLn part,wMat,-0.0145,0.023,-0.0150415,0.0224585
cLn part,wMat,-0.0150415,0.0224585,-0.0150415,0.011
cLn part,wMat,-0.0150415,0.011,-0.0175,0.011
cLn part,wMat,-0.0175,0.011,-0.0175,0.023
cCLn part,wMat,-0.0175,0.011,-0.0175,0.023
Part.SketchManager.InsertSketch True
end sub

sub codeBag11(part,wMat)
cLn part,wMat,-0.0175,0.023,-0.0145,0.023
cLn part,wMat,-0.0145,0.023,-0.0150415,0.0224585
cLn part,wMat,-0.0150415,0.0224585,-0.0150415,0.011
cLn part,wMat,-0.0150415,0.011,-0.0175,0.011
cLn part,wMat,-0.0175,0.011,-0.0175,0.023
cCLn part,wMat,-0.0175,0.011,-0.0175,0.023
Part.SketchManager.InsertSketch True
end sub

sub codeBag0(part,featMgr)
part.CreatePlaneFixed2 createVec3d(0,0,0),createVec3d(0,0,-1),createVec3d(0,1,0),1
set feat4=part.Extension.GetLastFeatureAdded()
feat4.select2 false,0
part.SketchManager.InsertSketch True
part.BlankRefGeom
Set swActiveMat = Part.SketchManager.ActiveSketch
swSketchMat= createMatFromSWMat(swActiveMat.ModelToSketchXForm)
mSkMat=createMat4x4FromValues(0,0,-1,0,1,0,1,0,0,0,0,0)
wMat=mulMat4x4Mat4x4(swSketchMat,mSkMat)
codeBag1 part,wMat
set feat4=part.Extension.GetLastFeatureAdded()
feat4.select2 false,0
featMgr.FeatureExtrusion2 0,0,1,0,0,0.025,0.025,1,1,0,0,0,0,0,0,0,0,1,1,1,0,0,0
part.CreatePlaneFixed2 createVec3d(0,0,0),createVec3d(0,0,-1),createVec3d(0,1,0),1
set feat6=part.Extension.GetLastFeatureAdded()
feat6.select2 false,0
part.SketchManager.InsertSketch True
part.BlankRefGeom
Set swActiveMat = Part.SketchManager.ActiveSketch
swSketchMat= createMatFromSWMat(swActiveMat.ModelToSketchXForm)
mSkMat=createMat4x4FromValues(0,0,-1,0,1,0,1,0,0,0,0,0)
wMat=mulMat4x4Mat4x4(swSketchMat,mSkMat)
codeBag2 part,wMat
set feat6=part.Extension.GetLastFeatureAdded()
feat6.select2 false,0
featMgr.FeatureExtrusion2 0,0,1,0,0,0.0225,0.0225,1,1,0,0,0,0,0,0,0,0,1,1,1,0,0,0
part.CreatePlaneFixed2 createVec3d(0,0,0),createVec3d(0,0,-1),createVec3d(0,1,0),1
set feat8=part.Extension.GetLastFeatureAdded()
feat8.select2 false,0
part.SketchManager.InsertSketch True
part.BlankRefGeom
Set swActiveMat = Part.SketchManager.ActiveSketch
swSketchMat= createMatFromSWMat(swActiveMat.ModelToSketchXForm)
mSkMat=createMat4x4FromValues(0,0,-1,0,1,0,1,0,0,0,0,0)
wMat=mulMat4x4Mat4x4(swSketchMat,mSkMat)
codeBag3 part,wMat
set feat8=part.Extension.GetLastFeatureAdded()
feat8.select2 false,0
featMgr.FeatureExtrusion2 0,0,1,0,0,0.0225,0.0225,1,1,0,0,0,0,0,0,0,0,1,1,1,0,0,0
part.CreatePlaneFixed2 createVec3d(0,-0.016,0),createVec3d(1,-0.016,0),createVec3d(0,-0.016,-1),1
set feat11=part.Extension.GetLastFeatureAdded()
feat11.select2 false,0
part.SketchManager.InsertSketch True
part.BlankRefGeom
Set swActiveMat = Part.SketchManager.ActiveSketch
swSketchMat= createMatFromSWMat(swActiveMat.ModelToSketchXForm)
mSkMat=createMat4x4FromValues(1,0,0,0,0,-1,0,1,0,0,-0.016,0)
wMat=mulMat4x4Mat4x4(swSketchMat,mSkMat)
codeBag4 part,wMat
set feat11=part.Extension.GetLastFeatureAdded()
feat11.select2 false,0
featMgr.FeatureExtrusion2 1,0,1,0,0,0.0005,0.0005,1,1,0,0,0,0,0,0,0,0,1,1,1,0,0,0
part.CreatePlaneFixed2 createVec3d(0,-0.016,0),createVec3d(1,-0.016,0),createVec3d(0,-0.016,-1),1
set feat13=part.Extension.GetLastFeatureAdded()
feat13.select2 false,0
part.SketchManager.InsertSketch True
part.BlankRefGeom
Set swActiveMat = Part.SketchManager.ActiveSketch
swSketchMat= createMatFromSWMat(swActiveMat.ModelToSketchXForm)
mSkMat=createMat4x4FromValues(1,0,0,0,0,-1,0,1,0,0,-0.016,0)
wMat=mulMat4x4Mat4x4(swSketchMat,mSkMat)
codeBag5 part,wMat
set feat13=part.Extension.GetLastFeatureAdded()
feat13.select2 false,0
featMgr.FeatureExtrusion2 1,0,1,0,0,0.0005,0.0005,1,1,0,0,0,0,0,0,0,0,1,1,1,0,0,0
part.CreatePlaneFixed2 createVec3d(0,-0.016,0),createVec3d(1,-0.016,0),createVec3d(0,-0.016,-1),1
set feat15=part.Extension.GetLastFeatureAdded()
feat15.select2 false,0
part.SketchManager.InsertSketch True
part.BlankRefGeom
Set swActiveMat = Part.SketchManager.ActiveSketch
swSketchMat= createMatFromSWMat(swActiveMat.ModelToSketchXForm)
mSkMat=createMat4x4FromValues(1,0,0,0,0,-1,0,1,0,0,-0.016,0)
wMat=mulMat4x4Mat4x4(swSketchMat,mSkMat)
codeBag6 part,wMat
set feat15=part.Extension.GetLastFeatureAdded()
feat15.select2 false,0
featMgr.FeatureExtrusion2 1,0,1,0,0,0.0005,0.0005,1,1,0,0,0,0,0,0,0,0,1,1,1,0,0,0
part.CreatePlaneFixed2 createVec3d(0,-0.016,0),createVec3d(1,-0.016,0),createVec3d(0,-0.016,-1),1
set feat17=part.Extension.GetLastFeatureAdded()
feat17.select2 false,0
part.SketchManager.InsertSketch True
part.BlankRefGeom
Set swActiveMat = Part.SketchManager.ActiveSketch
swSketchMat= createMatFromSWMat(swActiveMat.ModelToSketchXForm)
mSkMat=createMat4x4FromValues(1,0,0,0,0,-1,0,1,0,0,-0.016,0)
wMat=mulMat4x4Mat4x4(swSketchMat,mSkMat)
codeBag7 part,wMat
set feat17=part.Extension.GetLastFeatureAdded()
feat17.select2 false,0
featMgr.FeatureExtrusion2 1,0,1,0,0,0.0005,0.0005,1,1,0,0,0,0,0,0,0,0,1,1,1,0,0,0
part.CreatePlaneFixed2 createVec3d(0.0175,0,0),createVec3d(0.0175,0,-1),createVec3d(0.0175,1,0),1
set feat22=part.Extension.GetLastFeatureAdded()
feat22.select2 false,0
part.SketchManager.InsertSketch True
part.BlankRefGeom
Set swActiveMat = Part.SketchManager.ActiveSketch
swSketchMat= createMatFromSWMat(swActiveMat.ModelToSketchXForm)
mSkMat=createMat4x4FromValues(0,0,-1,0,1,0,1,0,0,0.0175,0,0)
wMat=mulMat4x4Mat4x4(swSketchMat,mSkMat)
codeBag8 part,wMat
set feat22=part.Extension.GetLastFeatureAdded()
feat22.select2 false,0
featMgr.FeatureRevolveCut2 6.2831853071796,1,6.2831853071796,0,0,1,1,false,false,false
 if getEdgeFromModel(part,createVec3d(0.0175,0.0224585,0.0150415),cylEdge) then
   cylEdge.Select(false)
   Part.InsertCosmeticThread 0,0.006,0.012,""
 elseif getEdgeFromModel(part,createVec3d(0.0175,0.011,0.0150415),cylEdge) then
   cylEdge.Select(false)
   Part.InsertCosmeticThread 0,0.006,0.012,""
 End If
part.CreatePlaneFixed2 createVec3d(-0.0175,0,0),createVec3d(-0.0175,0,-1),createVec3d(-0.0175,1,0),1
set feat28=part.Extension.GetLastFeatureAdded()
feat28.select2 false,0
part.SketchManager.InsertSketch True
part.BlankRefGeom
Set swActiveMat = Part.SketchManager.ActiveSketch
swSketchMat= createMatFromSWMat(swActiveMat.ModelToSketchXForm)
mSkMat=createMat4x4FromValues(0,0,-1,0,1,0,1,0,0,-0.0175,0,0)
wMat=mulMat4x4Mat4x4(swSketchMat,mSkMat)
codeBag9 part,wMat
set feat28=part.Extension.GetLastFeatureAdded()
feat28.select2 false,0
featMgr.FeatureRevolveCut2 6.2831853071796,1,6.2831853071796,0,0,1,1,false,false,false
 if getEdgeFromModel(part,createVec3d(-0.0175,0.0224585,0.0150415),cylEdge) then
   cylEdge.Select(false)
   Part.InsertCosmeticThread 0,0.006,0.012,""
 elseif getEdgeFromModel(part,createVec3d(-0.0175,0.011,0.0150415),cylEdge) then
   cylEdge.Select(false)
   Part.InsertCosmeticThread 0,0.006,0.012,""
 End If
part.CreatePlaneFixed2 createVec3d(0.0175,0,-0.035),createVec3d(0.0175,0,-1.035),createVec3d(0.0175,1,-0.035),1
set feat29=part.Extension.GetLastFeatureAdded()
feat29.select2 false,0
part.SketchManager.InsertSketch True
part.BlankRefGeom
Set swActiveMat = Part.SketchManager.ActiveSketch
swSketchMat= createMatFromSWMat(swActiveMat.ModelToSketchXForm)
mSkMat=createMat4x4FromValues(0,0,-1,0,1,0,1,0,0,0.0175,0,-0.035)
wMat=mulMat4x4Mat4x4(swSketchMat,mSkMat)
codeBag10 part,wMat
set feat29=part.Extension.GetLastFeatureAdded()
feat29.select2 false,0
featMgr.FeatureRevolveCut2 6.2831853071796,1,6.2831853071796,0,0,1,1,false,false,false
 if getEdgeFromModel(part,createVec3d(0.0175,0.0224585,-0.0199585),cylEdge) then
   cylEdge.Select(false)
   Part.InsertCosmeticThread 0,0.006,0.012,""
 elseif getEdgeFromModel(part,createVec3d(0.0175,0.011,-0.0199585),cylEdge) then
   cylEdge.Select(false)
   Part.InsertCosmeticThread 0,0.006,0.012,""
 End If
part.CreatePlaneFixed2 createVec3d(-0.0175,0,-0.035),createVec3d(-0.0175,0,-1.035),createVec3d(-0.0175,1,-0.035),1
set feat30=part.Extension.GetLastFeatureAdded()
feat30.select2 false,0
part.SketchManager.InsertSketch True
part.BlankRefGeom
Set swActiveMat = Part.SketchManager.ActiveSketch
swSketchMat= createMatFromSWMat(swActiveMat.ModelToSketchXForm)
mSkMat=createMat4x4FromValues(0,0,-1,0,1,0,1,0,0,-0.0175,0,-0.035)
wMat=mulMat4x4Mat4x4(swSketchMat,mSkMat)
codeBag11 part,wMat
set feat30=part.Extension.GetLastFeatureAdded()
feat30.select2 false,0
featMgr.FeatureRevolveCut2 6.2831853071796,1,6.2831853071796,0,0,1,1,false,false,false
 if getEdgeFromModel(part,createVec3d(-0.0175,0.0224585,-0.0199585),cylEdge) then
   cylEdge.Select(false)
   Part.InsertCosmeticThread 0,0.006,0.012,""
 elseif getEdgeFromModel(part,createVec3d(-0.0175,0.011,-0.0199585),cylEdge) then
   cylEdge.Select(false)
   Part.InsertCosmeticThread 0,0.006,0.012,""
 End If
end sub

sub main
set swApp = Application.SldWorks
code = swApp.RevisionNumber
found = InStr(code, ".")
If (found > 0) Then
  code = Left(code, found-1)
  docVisible=1
  If (CInt(code) >= 18) Then
    docVisible=0
  End If
End If
swApp.SetUserPreferenceToggle 11, FALSE
swApp.SetUserPreferenceToggle 97, FALSE
storePath=BrowseForFolder
If (storePath <> "") Then
   If ((Right(storePath, 1) <> "\") And (Right(storePath, 1) <> "/")) Then
       storePath = storePath + "\"
   End If
   createPart0
End If
end sub