### Tools & Equipment

- Laser cutter/CNC CNC Router (e.g., [Glowforge Basic](https://glowforge.com))
- Basic hand tools (drill, wrenches)
- Hex wrench (for shaft coupler)
- Ratchet tool (for tightening coupler nuts)
- Drill (for modifying hot end aluminum block)

### Hardware Components

- NEMA23 stepper motor (24V)
- 3-inch PVC plumbing wye fitting (7.62 cm)
- Heater band (for extrusion barrel)
- Solid State Relay (SSR) module (24VDC)
- MPCNC LowRider2 gantry ([V1Engineering](https://v1engineering.com))

### Software & Control

- Marlin firmware (on RAMBOv1.4 board)
- Repetier-Host control software ([Repetier](https://repetier.com))
- Laser cutter/CNC software (e.g., Glowforge interface)
- G-code compatible motion control system
- SVG spacer design files (provided in tutorial)

### Consumables & Materials

- 3/4" threaded bolts (1/4"-20)
- Wooden spacers (laser-cut or hand-drilled)
- M4 bolts (for motor bracket)
- 7/16" drill bit (11 mm hex shank)
- Thermistor probe (for temperature monitoring)