{
  "files": [],
  "id": "vJXgzNtpi35Cpq6erZzx",
  "difficulty_level": "Medium",
  "steps": [
    {
      "title": "Extrude hot munition",
      "images": [
        {
          "fullPath": "uploads/v3_howtos/vJXgzNtpi35Cpq6erZzx/Step 1 Extrude hot munition.PNG",
          "size": 106575,
          "name": "Step 1 Extrude hot munition.PNG",
          "updated": "2020-04-15T17:24:29.444Z",
          "timeCreated": "2020-04-15T17:24:29.444Z",
          "downloadUrl": "https://firebasestorage.googleapis.com/v0/b/onearmyworld.appspot.com/o/uploads%2Fv3_howtos%2FvJXgzNtpi35Cpq6erZzx%2FStep%201%20Extrude%20hot%20munition.PNG?alt=media&token=c91c1d7f-75f1-416c-b455-f6363415e8f6",
          "type": "image/jpeg",
          "contentType": "image/jpeg"
        },
        {
          "type": "image/jpeg",
          "timeCreated": "2020-04-15T17:24:31.477Z",
          "name": "Step 1 Extrude hot munition cutting.PNG",
          "contentType": "image/jpeg",
          "updated": "2020-04-15T17:24:31.477Z",
          "fullPath": "uploads/v3_howtos/vJXgzNtpi35Cpq6erZzx/Step 1 Extrude hot munition cutting.PNG",
          "size": 74924,
          "downloadUrl": "https://firebasestorage.googleapis.com/v0/b/onearmyworld.appspot.com/o/uploads%2Fv3_howtos%2FvJXgzNtpi35Cpq6erZzx%2FStep%201%20Extrude%20hot%20munition%20cutting.PNG?alt=media&token=260b5614-890c-4a86-8cce-855bccd13823"
        },
        {
          "type": "image/jpeg",
          "timeCreated": "2020-04-15T17:24:31.933Z",
          "fullPath": "uploads/v3_howtos/vJXgzNtpi35Cpq6erZzx/Step 1 Munition.PNG",
          "downloadUrl": "https://firebasestorage.googleapis.com/v0/b/onearmyworld.appspot.com/o/uploads%2Fv3_howtos%2FvJXgzNtpi35Cpq6erZzx%2FStep%201%20Munition.PNG?alt=media&token=3aacdd3b-90ac-4281-abb1-c1a3e7de4fd9",
          "name": "Step 1 Munition.PNG",
          "size": 74361,
          "updated": "2020-04-15T17:24:31.933Z",
          "contentType": "image/jpeg"
        }
      ],
      "text": "Instead of filling up the injection machine with flakes, use your extruder to produce hot munition. Remove the nozzle, in order to extrude thick stripes. Instantly take them and fill your injection barrel with them. \n\nIn the extruder, the plastic is mixed well and heated properly, so it is instantly processable with the injection machine.",
      "_animationKey": "unique1"
    },
    {
      "title": "Load Injection Machine",
      "images": [
        {
          "size": 131136,
          "downloadUrl": "https://firebasestorage.googleapis.com/v0/b/onearmyworld.appspot.com/o/uploads%2Fv3_howtos%2FvJXgzNtpi35Cpq6erZzx%2FStep%202%20load%20injection.PNG?alt=media&token=a29c5d36-ec4c-4ba4-9b0d-aa0a8a48ac6d",
          "fullPath": "uploads/v3_howtos/vJXgzNtpi35Cpq6erZzx/Step 2 load injection.PNG",
          "type": "image/jpeg",
          "updated": "2020-04-15T17:24:40.992Z",
          "timeCreated": "2020-04-15T17:24:40.992Z",
          "name": "Step 2 load injection.PNG",
          "contentType": "image/jpeg"
        }
      ],
      "text": "Take the hot stripes and insert them into the barrel of the injection machine. Try to extrude them a bit thinner than the diameter of your barrel. If they are too thick it will be a pain to load the machine. If they are to thin the barrel won't be loaded to its full extent.",
      "_animationKey": "unique2"
    },
    {
      "title": "Fire the injection Machine",
      "images": [
        {
          "downloadUrl": "https://firebasestorage.googleapis.com/v0/b/onearmyworld.appspot.com/o/uploads%2Fv3_howtos%2FvJXgzNtpi35Cpq6erZzx%2FStep%203%20inject.PNG?alt=media&token=1e54a47a-b2cb-48a9-8e75-8813ab567a8e",
          "fullPath": "uploads/v3_howtos/vJXgzNtpi35Cpq6erZzx/Step 3 inject.PNG",
          "timeCreated": "2020-04-15T17:24:51.656Z",
          "contentType": "image/jpeg",
          "size": 104215,
          "updated": "2020-04-15T17:24:51.656Z",
          "name": "Step 3 inject.PNG",
          "type": "image/jpeg"
        },
        {
          "size": 171916,
          "updated": "2020-04-15T17:24:58.619Z",
          "downloadUrl": "https://firebasestorage.googleapis.com/v0/b/onearmyworld.appspot.com/o/uploads%2Fv3_howtos%2FvJXgzNtpi35Cpq6erZzx%2FBild%20Milan%20mit%20Spritzguss%20Maschiene%20und%20Visieren%20in%20der%20Produktion.JPG?alt=media&token=f8f610ca-c399-42fd-b8cb-7af6c041ae24",
          "contentType": "image/jpeg",
          "name": "Bild Milan mit Spritzguss Maschiene und Visieren in der Produktion.JPG",
          "timeCreated": "2020-04-15T17:24:58.619Z",
          "type": "image/jpeg",
          "fullPath": "uploads/v3_howtos/vJXgzNtpi35Cpq6erZzx/Bild Milan mit Spritzguss Maschiene und Visieren in der Produktion.JPG"
        },
        {
          "timeCreated": "2020-04-15T17:25:10.216Z",
          "downloadUrl": "https://firebasestorage.googleapis.com/v0/b/onearmyworld.appspot.com/o/uploads%2Fv3_howtos%2FvJXgzNtpi35Cpq6erZzx%2FD9301E2A-A803-4392-8B6A-1D381C189A77.jpg?alt=media&token=5f90f579-2955-403b-b102-fec9a2e7e0a1",
          "updated": "2020-04-15T17:25:10.216Z",
          "name": "D9301E2A-A803-4392-8B6A-1D381C189A77.jpg",
          "size": 278187,
          "fullPath": "uploads/v3_howtos/vJXgzNtpi35Cpq6erZzx/D9301E2A-A803-4392-8B6A-1D381C189A77.jpg",
          "contentType": "image/jpeg",
          "type": "image/jpeg"
        }
      ],
      "_animationKey": "unique3",
      "text": "Now place the mold under your injection machine and inject the melted plastic. In this case, we are using the professional mold for face shields from Plastic Preneur (a cool company from Austria). In order to achieve maximum efficiency, we have one person reload the injection machine, while the other person opens & closes the mold. This way, we achieve a cycle of about 2 minutes per part."
    }
  ],
  "_id": "vJXgzNtpi35Cpq6erZzx",
  "creatorCountry": "",
  "_createdBy": "qi-tech",
  "slug": "rapid-fire-method-for-injection--300-face-shields-a-day",
  "_contentModifiedTimestamp": "2023-06-14T11:02:21.207Z",
  "moderation": "accepted",
  "title": "Rapid-Fire-Method for Injection / 300 Face Shields a Day",
  "_modified": "2023-10-20T13:53:16.753Z",
  "fileLink": "",
  "total_views": 222,
  "_created": "2020-04-15T17:25:10.225Z",
  "tags": [
    "PP",
    "injection",
    "HDPE",
    "extrusion"
  ],
  "_deleted": false,
  "votedUsefulBy": [
    "mattia",
    "precious-plastic-genova",
    "greenellipsis"
  ],
  "comments": [],
  "description": "With our Rapid-Fire-Method you can reduce your time-per-part by 50%.\n\nWe started 3D-Printing face shields a while ago, but we couldn´t keep up with the demand. So we built a small injection machine to speed up production. Though we had to wait 7-8 minutes bevor we could make another face shield frame,  because the plastic flakes had to heat up. \n\nTo reduce the time-per-part we invented the Rapid-Fire-Method. Using our extruder we produce hot munition for the injection and instantly process it.\n\nWe made a video how to do this. Check it out:\n\nhttps://youtu.be/69aYBJfxHw0",
  "total_downloads": 0,
  "category": {
    "_modified": "2022-09-18T08:51:47.196Z",
    "_created": "2022-09-18T08:51:47.196Z",
    "_deleted": false,
    "_id": "CrZjHORWfxEl6iDrrPIO",
    "label": "Guides"
  },
  "cover_image": {
    "name": "2F80C5D6-A07B-4B07-84E3-DA703DACE960.png",
    "downloadUrl": "https://firebasestorage.googleapis.com/v0/b/onearmyworld.appspot.com/o/uploads%2Fv3_howtos%2FvJXgzNtpi35Cpq6erZzx%2F2F80C5D6-A07B-4B07-84E3-DA703DACE960.png?alt=media&token=b8bd61b5-43fb-4344-b073-88426333d642",
    "type": "image/jpeg",
    "size": 140640,
    "contentType": "image/jpeg",
    "timeCreated": "2020-04-15T17:24:24.355Z",
    "fullPath": "uploads/v3_howtos/vJXgzNtpi35Cpq6erZzx/2F80C5D6-A07B-4B07-84E3-DA703DACE960.png",
    "updated": "2020-04-15T17:24:24.355Z"
  },
  "time": "< 1 week",
  "user": {
    "_deleted": false,
    "moderation": "accepted",
    "verified": false,
    "detail": {
      "heroImageUrl": "https://firebasestorage.googleapis.com/v0/b/onearmyworld.appspot.com/o/uploads%2Fusers%2Fqi-tech%2FIMG_1687.jpg?alt=media&token=487f0bf0-8ccd-40da-a56d-6522a5011ffd",
      "shortDescription": "We recycle Plastic to 3D-printing Filament. ",
      "profilePicUrl": "https://firebasestorage.googleapis.com/v0/b/onearmyworld.appspot.com/o/avatars%2Fqi-tech.jpg?alt=media",
      "profileUrl": "https://community.preciousplastic.com/u/qi-tech",
      "displayName": "QiTech",
      "name": "qi-tech",
      "lastActive": "2022-04-05T20:44:04.895Z",
      "verifiedBadge": false
    },
    "_id": "qi-tech",
    "location": {
      "lat": 49.8528,
      "lng": 8.35486
    },
    "_modified": "2022-05-20T13:17:18.980Z",
    "_created": "2022-05-20T13:17:12.880Z",
    "type": "machine-builder",
    "subType": "mix",
    "geo": {
      "latitude": 49.8528,
      "lookupSource": "coordinates",
      "longitude": 8.35486,
      "localityLanguageRequested": "en",
      "continent": "Europe",
      "continentCode": "EU",
      "countryName": "Germany",
      "countryCode": "DE",
      "principalSubdivision": "Rheinland-Pfalz",
      "principalSubdivisionCode": "DE-RP",
      "city": "Oppenheim",
      "locality": "Oppenheim",
      "postcode": "55276",
      "plusCode": "8FXCV933+4W",
      "localityInfo": {
        "administrative": [
          {
            "name": "Germany",
            "description": "country in central Europe",
            "isoName": "Germany",
            "order": 3,
            "adminLevel": 2,
            "isoCode": "DE",
            "wikidataId": "Q183",
            "geonameId": 2921044
          },
          {
            "name": "Rheinland-Pfalz",
            "description": "state of the Federal Republic of Germany",
            "isoName": "Rheinland-Pfalz",
            "order": 4,
            "adminLevel": 4,
            "isoCode": "DE-RP",
            "wikidataId": "Q1200",
            "geonameId": 2847618
          },
          {
            "name": "Mainz-Bingen",
            "description": "district of Rhineland-Palatinate, Germany",
            "order": 8,
            "adminLevel": 6,
            "wikidataId": "Q8569",
            "geonameId": 3247466
          },
          {
            "name": "Verbandsgemeinde Rhein-Selz",
            "order": 9,
            "adminLevel": 7,
            "wikidataId": "Q15852580"
          },
          {
            "name": "Oppenheim",
            "description": "municipality of Germany",
            "order": 11,
            "adminLevel": 8,
            "wikidataId": "Q518690",
            "geonameId": 2857167
          }
        ],
        "informative": [
          {
            "name": "Europe",
            "description": "continent",
            "isoName": "Europe",
            "order": 1,
            "isoCode": "EU",
            "wikidataId": "Q46",
            "geonameId": 6255148
          },
          {
            "name": "Europe/Berlin",
            "description": "time zone",
            "order": 2
          },
          {
            "name": "Rhein-Nahe Nahverkehrsverbund",
            "order": 5
          },
          {
            "name": "Rettungsdienstbereich Rheinhessen",
            "order": 6
          },
          {
            "name": "Worms (electoral district)",
            "description": "federal electoral district of Germany",
            "order": 7,
            "wikidataId": "Q1008739"
          },
          {
            "name": "Nierstein-Oppenheim",
            "description": "former Verbandsgemeinde in Rhineland-Palatinate",
            "order": 10,
            "wikidataId": "Q369906"
          },
          {
            "name": "55276",
            "description": "postal code",
            "order": 12
          }
        ]
      }
    },
    "data": {
      "urls": [
        {
          "name": "Website",
          "url": "http://www.qitech.de"
        },
        {
          "name": "Instagram",
          "url": "https://www.instagram.com/qitech.de/"
        },
        {
          "name": "Facebook",
          "url": "https://www.facebook.com/qitech.de/"
        },
        {
          "name": "sponsor the work",
          "url": "https://www.patreon.com/one_army"
        }
      ],
      "description": "We are a couple of students from Germany pushing forward on recycling plastic waste into 3D-printing filament. We started cutting plastic with garden scissors and a kitchen mixer, now we have a 200KG shredder. We built 6 extruders so far, learning and researching lots along the way. We share everything we do on Instagram (@qitech.de) and on our Website (www.qitech.de).",
      "services": [
        {
          "welding": false,
          "assembling": false,
          "machining": false,
          "electronics": false,
          "molds": false
        }
      ],
      "title": "QiTech",
      "images": []
    }
  },
  "images": []
}