---
title: (if wall-mounted) Make it taller
slug: if-wall-mounted-make-it-taller
step: 3
howto: easily-hands-free-connect-moulds-to-the-injector
tags: ["hack","product","untagged","injection"]
category: Guides
difficulty: Easy
time: < 1 hour
location: Lancaster, United Kingdom of Great Britain and Northern Ireland (the)
---
# Step 3: (if wall-mounted) Make it taller
We employed four pieces of wood, each measuring 3x2 (7.6 cm x 5.1 cm), at each corner of the flat plate on the stand, finishing with a flat piece of wood on top to create an elevated platform for the molds. This structure could alternatively be constructed from metal and vary in shape if necessary. The space in the center of the pillars is convenient for storing height-adjustment blocks.

You may find that the existing height suffices, or you can add wooden blocks to achieve the desired elevation when utilizing a floor-based injection molder.

An alternative design could involve shortening the pillars and adding a tufftuff jack on top. This would eliminate the need for varied thicknesses of wooden blocks based on the mold being used, as the tufftuff jack (with a plate on top) allows adjustment of the overall working height. The bike stand can then provide the additional travel required to interface with the nozzle.
![WhatsApp Image 2022-03-11 at 16.44.20 (3)-17f79e6f15c.jpeg](/resources/howtos/easily-hands-free-connect-moulds-to-the-injector/whatsapp_image_2022-03-11_at_16.44.20_3-17f79e6f15c.jpeg)