/** * Copyright (C) 2011 Circuits At Home, LTD. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Contact information * ------------------- * * Circuits At Home, LTD * Web : http://www.circuitsathome.com * e-mail : support@circuitsathome.com */ #pragma once #include "../../../inc/MarlinConfig.h" #include "macros.h" #if ENABLED(USB_FLASH_DRIVE_SUPPORT) //////////////////////////////////////////////////////////////////////////////// /* Added by Bill Greiman to speed up mass storage initialization with USB * flash drives and simple USB hard drives. * Disable this by defining DELAY(x) to be delay(x). */ #define delay(x) if ((x) < 200) safe_delay(x) /* Almost all USB flash drives and simple USB hard drives fail the write * protect test and add 20 - 30 seconds to USB init. Set SKIP_WRITE_PROTECT * to nonzero to skip the test and assume the drive is writable. */ #define SKIP_WRITE_PROTECT 1 /* Since Marlin only cares about USB flash drives, we only need one LUN. */ #define MASS_MAX_SUPPORTED_LUN 1 #endif //////////////////////////////////////////////////////////////////////////////// // SPI Configuration //////////////////////////////////////////////////////////////////////////////// #ifndef USB_SPI #define USB_SPI SPI //#define USB_SPI SPI1 #endif //////////////////////////////////////////////////////////////////////////////// // DEBUGGING //////////////////////////////////////////////////////////////////////////////// /* Set this to 1 to activate serial debugging */ #define ENABLE_UHS_DEBUGGING 0 /* This can be used to select which serial port to use for debugging if * multiple serial ports are available. * For example Serial3. */ #if ENABLED(USB_FLASH_DRIVE_SUPPORT) #define USB_HOST_SERIAL MYSERIAL0 #endif #ifndef USB_HOST_SERIAL #define USB_HOST_SERIAL Serial #endif //////////////////////////////////////////////////////////////////////////////// // Manual board activation //////////////////////////////////////////////////////////////////////////////// /* Set this to 1 if you are using an Arduino Mega ADK board with MAX3421e built-in */ #define USE_UHS_MEGA_ADK 0 // If you are using Arduino 1.5.5 or newer there is no need to do this manually /* Set this to 1 if you are using a Black Widdow */ #define USE_UHS_BLACK_WIDDOW 0 /* Set this to a one to use the xmem2 lock. This is needed for multitasking and threading */ #define USE_XMEM_SPI_LOCK 0 //////////////////////////////////////////////////////////////////////////////// // Wii IR camera //////////////////////////////////////////////////////////////////////////////// /* Set this to 1 to activate code for the Wii IR camera */ #define ENABLE_WII_IR_CAMERA 0 //////////////////////////////////////////////////////////////////////////////// // MASS STORAGE //////////////////////////////////////////////////////////////////////////////// // ******* IMPORTANT ******* // Set this to 1 to support single LUN devices, and save RAM. -- I.E. thumb drives. // Each LUN needs ~13 bytes to be able to track the state of each unit. #ifndef MASS_MAX_SUPPORTED_LUN #define MASS_MAX_SUPPORTED_LUN 8 #endif //////////////////////////////////////////////////////////////////////////////// // Set to 1 to use the faster spi4teensy3 driver. //////////////////////////////////////////////////////////////////////////////// #ifndef USE_SPI4TEENSY3 #define USE_SPI4TEENSY3 1 #endif // Disabled on the Teensy LC, as it is incompatible for now #ifdef __MKL26Z64__ #undef USE_SPI4TEENSY3 #define USE_SPI4TEENSY3 0 #endif //////////////////////////////////////////////////////////////////////////////// // AUTOMATIC Settings //////////////////////////////////////////////////////////////////////////////// // No user serviceable parts below this line. // DO NOT change anything below here unless you are a developer! //#include "version_helper.h" #if defined(__GNUC__) && defined(__AVR__) #ifndef GCC_VERSION #define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__) #endif #if GCC_VERSION < 40602 // Test for GCC < 4.6.2 #ifdef PROGMEM #undef PROGMEM #define PROGMEM __attribute__((section(".progmem.data"))) // Workaround for http://gcc.gnu.org/bugzilla/show_bug.cgi?id=34734#c4 #ifdef PSTR #undef PSTR #define PSTR(s) (__extension__({static const char __c[] PROGMEM = (s); &__c[0];})) // Copied from pgmspace.h in avr-libc source #endif #endif #endif #endif #if !defined(DEBUG_USB_HOST) && ENABLE_UHS_DEBUGGING #define DEBUG_USB_HOST #endif #if !defined(WIICAMERA) && ENABLE_WII_IR_CAMERA #define WIICAMERA #endif // To use some other locking (e.g. freertos), // define XMEM_ACQUIRE_SPI and XMEM_RELEASE_SPI to point to your lock and unlock. // NOTE: NO argument is passed. You have to do this within your routine for // whatever you are using to lock and unlock. #ifndef XMEM_ACQUIRE_SPI #if USE_XMEM_SPI_LOCK || defined(USE_MULTIPLE_APP_API) #include #else #define XMEM_ACQUIRE_SPI() (void(0)) #define XMEM_RELEASE_SPI() (void(0)) #endif #endif #if !defined(EXT_RAM) && defined(EXT_RAM_STACK) || defined(EXT_RAM_HEAP) #include #else #define EXT_RAM 0 #endif #if defined(CORE_TEENSY) && defined(KINETISK) #define USING_SPI4TEENSY3 USE_SPI4TEENSY3 #else #define USING_SPI4TEENSY3 0 #endif #if ((defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)) || defined(__ARDUINO_X86__) || ARDUINO >= 10600) && !USING_SPI4TEENSY3 #include // Use the Arduino SPI library for the Arduino Due, Intel Galileo 1 & 2, Intel Edison or if the SPI library with transaction is available #endif #ifdef RBL_NRF51822 #include #include #define SPI SPI_Master #define MFK_CASTUINT8T (uint8_t) // RBLs return type for sizeof needs casting to uint8_t #endif #if defined(__PIC32MX__) || defined(__PIC32MZ__) #include <../../../../hardware/pic32/libraries/SPI/SPI.h> // Hack to use the SPI library #endif #if defined(ESP8266) || defined(ESP32) #define MFK_CASTUINT8T (uint8_t) // ESP return type for sizeof needs casting to uint8_t #endif #ifdef STM32F4 #include "stm32f4xx_hal.h" extern SPI_HandleTypeDef SPI_Handle; // Needed to be declared in your main.cpp #endif // Fix defines on Arduino Due #ifdef ARDUINO_SAM_DUE #ifdef tokSETUP #undef tokSETUP #endif #ifdef tokIN #undef tokIN #endif #ifdef tokOUT #undef tokOUT #endif #ifdef tokINHS #undef tokINHS #endif #ifdef tokOUTHS #undef tokOUTHS #endif #endif // Set defaults #ifndef MFK_CASTUINT8T #define MFK_CASTUINT8T #endif // Workaround issue: https://github.com/esp8266/Arduino/issues/2078 #ifdef ESP8266 #undef PROGMEM #define PROGMEM #undef PSTR #define PSTR(s) (s) #undef pgm_read_byte #define pgm_read_byte(addr) (*reinterpret_cast(addr)) #undef pgm_read_word #define pgm_read_word(addr) (*reinterpret_cast(addr)) #endif #ifdef ARDUINO_ESP8266_WIFIO #error "This board is currently not supported" #endif