/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /**************************************************************************************** * Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) Breadboard pin assignments * Requires the Teensyduino software with Teensy 3.5 or Teensy 3.6 selected in Arduino IDE! * http://www.pjrc.com/teensy/teensyduino.html ****************************************************************************************/ #if !IS_32BIT_TEENSY #error "Oops! Select 'Teensy 3.5' or 'Teensy 3.6' in 'Tools > Board.'" #endif #if IS_TEENSY35 #define BOARD_INFO_NAME "Teensy3.5" #elif IS_TEENSY36 #define BOARD_INFO_NAME "Teensy3.6" #endif #define AT90USB 1286 // Disable MarlinSerial etc. #define USBCON //1286 // Disable MarlinSerial etc. /* teemuatlut plan for Teensy3.5 and Teensy3.6: USB GND |-----#####-----| VIN 5V X_STEP_PIN MOSI1 RX1 0 | ##### | Analog GND X_DIR_PIN MISO1 TX1 1 | | 3.3V Y_STEP_PIN PWM 2 | *NC AREF* | 23 A9 PWM Y_DIR_PIN SCL2 CAN0TX PWM 3 | *A26 A10* | 22 A8 PWM Z_STEP_PIN SDA2 CAN0RX PWM 4 | *A25 A11* | 21 A7 PWM CS0 MOSI1 RX1 Z_DIR_PIN MISO1 TX1 PWM 5 | *GND * * 57 | 20 A6 PWM CS0 SCK1 FILWIDTH_PIN X_ENABLE_PIN PWM 6 | *GND * * 56 | 19 A5 SCL0 E0_STEP_PIN Y_ENABLE_PIN SCL0 MOSI0 RX3 PWM 7 | * * 55 | 18 A4 SDA0 E0_DIR_PIN Z_ENABLE_PIN SDA0 MISO0 TX3 PWM 8 | * * 54 | 17 A3 SDA0 E0_ENABLE_PIN CS0 RX2 PWM 9 | | 16 A2 SCL0 TEMP_0_PIN CS0 TX2 PWM 10 | | 15 A1 CS0 TEMP_BED_PIN X_STOP_PIN MOSI0 11 | | 14 A0 PWM CS0 TEMP_1_PIN Y_STOP_PIN MISO0 12 | | 13 LED SCK0 LED_PIN 3.3V | | GND Z_STOP_PIN 24 | 40 * * 53 | A22 DAC1 AUX2 25 | 41 * * 52 | A21 DAC0 AUX2 FAN_PIN SCL2 TX1 26 | 42 * * 51 | 39 A20 MISO0 SDSS AUX2 Z-PROBE PWR SCK0 RX1 27 | * * * * * | 38 A19 PWM SDA1 AUX2 SOL1_PIN MOSI0 28 | 43 * * 50 | 37 A18 PWM SCL1 D10 CONTROLLER_FAN_PIN CAN0TX PWM 29 | 44 * * 49 | 36 A17 PWM D9 HEATER_0_PIN CAN0RX PWM 30 | 45 * * 48 | 35 A16 PWM E1_ENABLE_PIN D8 HEATER_BED_PIN CS1 RX4 A12 31 | 46 * * 47 | 34 A15 PWM SDA0 RX5 E1_DIR_PIN SCK1 TX4 A13 32 |__GND_*_*_3.3V_| 33 A14 PWM SCL0 TX5 E1_STEP_PIN Interior pins: LCD_PINS_RS 40 * * 53 SCK2 LCD_PINS_ENABLE 41 * * 52 MOSI2 LCD_PINS_D4 42 * * 51 MISO2 LCD_PINS_D5 CS2 43 * * 50 A24 LCD_PINS_D6 MOSI2 44 * * 49 A23 LCD_PINS_D7 MISO2 45 * * 48 TX6 SDA0 BTN_ENC BTN_EN1 SCK2 46 * * 47 RX6 SCL0 BTN_EN2 GND * * 3.3V */ // // Limit Switches // #define X_STOP_PIN 24 #define Y_STOP_PIN 26 #define Z_STOP_PIN 28 // // Steppers // #define X_STEP_PIN 22 #define X_DIR_PIN 21 #define X_ENABLE_PIN 39 #define Y_STEP_PIN 19 #define Y_DIR_PIN 18 #define Y_ENABLE_PIN 20 #define Z_STEP_PIN 38 #define Z_DIR_PIN 37 #define Z_ENABLE_PIN 17 #define E0_STEP_PIN 31 #define E0_DIR_PIN 30 #define E0_ENABLE_PIN 32 #define E1_STEP_PIN 33 #define E1_DIR_PIN 34 #define E1_ENABLE_PIN 35 #define HEATER_0_PIN 30 #define HEATER_1_PIN 36 #define HEATER_BED_PIN 31 #ifndef FAN_PIN #define FAN_PIN 2 #endif #define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2 #define TEMP_1_PIN 0 #define TEMP_BED_PIN 1 // Bed / Analog pin numbering #define SDSS 39 // 8 #define LED_PIN 13 #define PS_ON_PIN 1 #define ALARM_PIN -1 #define FILWIDTH_PIN 6 #define SOL1_PIN 28 #if 0 // Pretty sure this is obsolete! // Please use Marlin 1.1.x pins files as reference for new pins files. #ifndef SDSUPPORT // these are defined in the SD library if building with SD support #define SCK_PIN 13 #define MISO_PIN 12 #define MOSI_PIN 11 #endif #endif #if HAS_SPI_LCD #define LCD_PINS_RS 40 #define LCD_PINS_ENABLE 41 #define LCD_PINS_D4 42 #define LCD_PINS_D5 43 #define LCD_PINS_D6 44 #define LCD_PINS_D7 45 #endif #if ENABLED(NEWPANEL) #define BTN_EN1 46 #define BTN_EN2 47 #define BTN_ENC 48 #endif #if ENABLED(REPRAPWORLD_KEYPAD) #define SHIFT_OUT 40 #define SHIFT_CLK 44 #define SHIFT_LD 42 #endif