/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/************************************************
 * Rambo pin assignments MODIFIED FOR Scoovo X9H
 ************************************************/

#ifndef __AVR_ATmega2560__
  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif

#define BOARD_INFO_NAME "Scoovo X9H"

//
// Servos
//
#define SERVO0_PIN                            22  // Motor header MX1
#define SERVO1_PIN                            23  // Motor header MX2
#define SERVO2_PIN                            24  // Motor header MX3
#define SERVO3_PIN                             5  // PWM header pin 5

//
// Limit Switches
//
#define X_MIN_PIN                             12
#define X_MAX_PIN                             24
#define Y_MIN_PIN                             11
#define Y_MAX_PIN                             23
#define Z_MIN_PIN                             10
#define Z_MAX_PIN                             30

//
// Z Probe (when not Z_MIN_IN)
//
#ifndef Z_MIN_PROBE_PIN
  #define Z_MIN_PROBE_PIN                     30
#endif

//
// Steppers
//
#define X_STEP_PIN                            37
#define X_DIR_PIN                             48
#define X_ENABLE_PIN                          29

#define Y_STEP_PIN                            36
#define Y_DIR_PIN                             49
#define Y_ENABLE_PIN                          28

#define Z_STEP_PIN                            35
#define Z_DIR_PIN                             47
#define Z_ENABLE_PIN                          27

#define E0_STEP_PIN                           34
#define E0_DIR_PIN                            43
#define E0_ENABLE_PIN                         26

#define E1_STEP_PIN                           33
#define E1_DIR_PIN                            42
#define E1_ENABLE_PIN                         25

// Microstepping pins - Mapping not from fastio.h (?)
#define X_MS1_PIN                             40
#define X_MS2_PIN                             41
#define Y_MS1_PIN                             69
#define Y_MS2_PIN                             39
#define Z_MS1_PIN                             68
#define Z_MS2_PIN                             67
#define E0_MS1_PIN                            65
#define E0_MS2_PIN                            66
#define E1_MS1_PIN                            63
#define E1_MS2_PIN                            64

#define DIGIPOTSS_PIN                         38
#define DIGIPOT_CHANNELS {4,5,3,0,1}   // X Y Z E0 E1 digipot channels to stepper driver mapping

//
// Temperature Sensors
//
#define TEMP_0_PIN                             0  // Analog Input
#define TEMP_BED_PIN                           7  // Analog Input

//
// Heaters / Fans
//
#define HEATER_0_PIN                           9
#define HEATER_1_PIN                           7
#define HEATER_BED_PIN                         3

#ifndef FAN_PIN
  #define FAN_PIN                              8
#endif
#define FAN1_PIN                               6
#define FAN2_PIN                               2

//
// Misc. Functions
//
#define SDSS                                  53
#define LED_PIN                               13
#define PS_ON_PIN                              4

#ifndef FILWIDTH_PIN
  #define FILWIDTH_PIN                         3  // Analog Input
#endif

//
// LCD / Controller
//
#define LCD_PINS_RS                           70  // Ext2_5
#define LCD_PINS_ENABLE                       71  // Ext2_7
#define LCD_PINS_D4                           72  // Ext2_9 ?
#define LCD_PINS_D5                           73  // Ext2_11 ?
#define LCD_PINS_D6                           74  // Ext2_13
#define LCD_PINS_D7                           75  // Ext2_15 ?
#define BEEPER_PIN                            -1

#define BTN_HOME                              80  // Ext_16
#define BTN_CENTER                            81  // Ext_14
#define BTN_ENC                       BTN_CENTER
#define BTN_RIGHT                             82  // Ext_12
#define BTN_LEFT                              83  // Ext_10
#define BTN_UP                                84  // Ext2_8
#define BTN_DOWN                              85  // Ext2_6

#define HOME_PIN                        BTN_HOME

#if ANY(VIKI2, miniVIKI)
  #define BEEPER_PIN                          44
  // Pins for DOGM SPI LCD Support
  #define DOGLCD_A0                           70
  #define DOGLCD_CS                           71
  #define LCD_SCREEN_ROT_180

  #define SD_DETECT_PIN                       -1  // Pin 72 if using easy adapter board

  #define STAT_LED_RED_PIN                    22
  #define STAT_LED_BLUE_PIN                   32
#endif // VIKI2/miniVIKI