Patches 3 for CycleDesign v4.9
==============================

Important note:
HEIDENHAIN provides no guarantee for patches.
Only install the patch files if you require the error fixes or enhancements described.

Installation (Administrator priviledges required):
Extract all files from the zip archive into the CycleDesign program files folder.
Make a backup copy of the original files first!


09.03.2016 CycleDesign Version 4.10 Build 440 (Patch)
====================================================
- ExecuteOnly flag in CDF und CDC file (v4.7) if no softkey is assigned (Call 118201)
- Support of FCL und OPT Filter in CDF file (v4.7) (Call 65176)
- Check of identic entries (e.g. Query Softkeys) improved (Call 96976)
- "Capture axis position" only in manual Cykles allowed (Call 99450)
-	The default target directory is preset with a tree type matching index (Call 119708)
- The horizontal scroll bar is displayed when needed in the register Additional Files 
  of the Cycle dialog. (Call 104821)
- Windows 7 clipboard problem repaired 
- Support of Mlst 12 controls
- The max. length of parameter comments and dialogs are controlled now for 
  all controls, not only TNC 426/430 (Call 112707)
- The generation process of installation media for TNC 640 and other NCK based controls
  did not collect the additional NC files
- The function Extras > Encode NC file did not work correctly, if the file contained NC blocks 
  with more than 128 characters after compression. Example: CYCLE DEF 220 POLAR PATTERN (Call 110874)


04.05.2016 CycleDesignGen Version 2.50 Build 110 (Patch)
========================================================
- It was not possible to read the CDC file of the TNC 620 817600 xx because the ident 
  was not recognized as NCK based control with MLST >= 5. (Call 112765)