// Copyright 2018 Erdem U. Altinyurt
// Copyright 2019 David Conran

// Supports:
//   Brand: Vestel,  Model: BIOX CXP-9 A/C (9K BTU)

#ifndef IR_VESTEL_H_
#define IR_VESTEL_H_

#define __STDC_LIMIT_MACROS
#include <stdint.h>
#ifdef ARDUINO
#include <Arduino.h>
#endif
#include "IRremoteESP8266.h"
#include "IRsend.h"
#ifdef UNIT_TEST
#include "IRsend_test.h"
#endif

// Vestel added by Erdem U. Altinyurt

// Structure of a Command message (56 bits)
//   Signature: 12 bits. e.g. 0x201
//   Checksum: 8 bits
//   Swing: 4 bits. (auto 0xA, stop 0xF)
//   turbo_sleep_normal: 4bits. (normal 0x1, sleep 0x3, turbo 0x7)
//   Unused: 8 bits. (0x00)
//   Temperature: 4 bits. (Celsius, but offset by -16 degrees. e.g. 0x0 = 16C)
//   Fan Speed: 4 bits (auto 0x1, low 0x5, mid 0x9, high 0xB, 0xD auto hot,
//                    0xC auto cool)
//   Mode: 3 bits. (auto 0x0, cold 0x1, dry 0x2, fan 0x3, hot 0x4)
//   unknown/unused: 6 bits.
//   Ion flag: 1 bit.
//   unknown/unused: 1 bit.
//   Power/message type: 4 bits. (on 0xF, off 0xC, 0x0 == Timer mesage)
//
// Structure of a Time(r) message (56 bits)
//   Signature: 12 bits. e.g. 0x201
//   Checksum: 8 bits
//   Off Minutes: 3 bits. (Stored in 10 min increments. eg. xx:20 is 0x2)
//   Off Hours: 5 bits. (0x17 == 11PM / 23:00)
//   On Minutes: 3 bits. (Stored in 10 min increments. eg. xx:20 is 0x2)
//   On Hours: 5 bits. (0x9 == 9AM / 09:00)
//   Clock Hours: 5 bits.
//   On Timer flag: 1 bit.
//   Off Timer flag: 1 bit.
//   Timer mode flag: 1 bit. (Off after X many hours/mins, not at clock time.)
//   Clock Minutes: 8 bits. (0-59)
//   Power/message type: 4 bits. (0x0 == Timer mesage, else see Comman message)

// Constants
const uint16_t kVestelAcHdrMark = 3110;
const uint16_t kVestelAcHdrSpace = 9066;
const uint16_t kVestelAcBitMark = 520;
const uint16_t kVestelAcOneSpace = 1535;
const uint16_t kVestelAcZeroSpace = 480;
const uint16_t kVestelAcTolerance = 30;

const uint8_t kVestelAcMinTempH = 16;
const uint8_t kVestelAcMinTempC = 18;
const uint8_t kVestelAcMaxTemp = 30;

const uint8_t kVestelAcAuto = 0;
const uint8_t kVestelAcCool = 1;
const uint8_t kVestelAcDry = 2;
const uint8_t kVestelAcFan = 3;
const uint8_t kVestelAcHeat = 4;

const uint8_t kVestelAcFanAuto = 1;
const uint8_t kVestelAcFanLow = 5;
const uint8_t kVestelAcFanMed = 9;
const uint8_t kVestelAcFanHigh = 0xB;
const uint8_t kVestelAcFanAutoCool = 0xC;
const uint8_t kVestelAcFanAutoHot = 0xD;

const uint8_t kVestelAcNormal = 1;
const uint8_t kVestelAcSleep = 3;
const uint8_t kVestelAcTurbo = 7;
const uint8_t kVestelAcIon = 4;
const uint8_t kVestelAcSwing = 0xA;

const uint8_t kVestelAcChecksumOffset = 12;
const uint8_t kVestelAcChecksumSize = 8;  // Nr. of bits
const uint8_t kVestelAcSwingOffset = 20;
const uint8_t kVestelAcTurboSleepOffset = 24;
const uint8_t kVestelAcTempOffset = 36;
const uint8_t kVestelAcFanOffset = 40;
const uint8_t kVestelAcFanSize = 4;  // Nr. of bits
const uint8_t kVestelAcModeOffset = 44;
const uint8_t kVestelAcIonOffset = 50;
const uint8_t kVestelAcPowerOffset = 52;
const uint8_t kVestelAcPowerSize = 2;  // Nr. of bits
const uint8_t kVestelAcOffTimeOffset = 20;
const uint8_t kVestelAcOnTimeOffset = 28;
const uint8_t kVestelAcTimerHourSize = 5;  // Nr. of bits
const uint8_t kVestelAcTimerMinsSize = 3;  // Nr. of bits
const uint8_t kVestelAcTimerSize = kVestelAcTimerHourSize +
    kVestelAcTimerMinsSize;  // Nr. of bits
const uint8_t kVestelAcHourOffset = 36;  // 5 bits
const uint8_t kVestelAcHourSize = 5;  // Nr. of bits
const uint8_t kVestelAcOnTimerFlagOffset = kVestelAcHourOffset + 5;
const uint8_t kVestelAcOffTimerFlagOffset = kVestelAcHourOffset + 6;
const uint8_t kVestelAcTimerFlagOffset = kVestelAcHourOffset + 7;
const uint8_t kVestelAcMinuteOffset = 44;
const uint8_t kVestelAcMinuteSize = 8;  // Nr. of bits
// Default states
const uint64_t kVestelAcStateDefault = 0x0F00D9001FEF201ULL;
const uint64_t kVestelAcTimeStateDefault = 0x201ULL;

class IRVestelAc {
 public:
  explicit IRVestelAc(const uint16_t pin, const bool inverted = false,
                      const bool use_modulation = true);

  void stateReset(void);
#if SEND_VESTEL_AC
  void send(void);
  int8_t calibrate(void) { return _irsend.calibrate(); }
#endif  // SEND_VESTEL_AC
  void begin(void);
  void on(void);
  void off(void);
  void setPower(const bool on);
  bool getPower(void);
  void setAuto(const int8_t autoLevel);
  void setTimer(const uint16_t minutes);
  uint16_t getTimer(void);
  void setTime(const uint16_t minutes);
  uint16_t getTime(void);
  void setOnTimer(const uint16_t minutes);
  uint16_t getOnTimer(void);
  void setOffTimer(const uint16_t minutes);
  uint16_t getOffTimer(void);
  void setTemp(const uint8_t temp);
  uint8_t getTemp(void);
  void setFan(const uint8_t fan);
  uint8_t getFan(void);
  void setMode(const uint8_t mode);
  uint8_t getMode(void);
  void setRaw(const uint8_t* newState);
  void setRaw(const uint64_t newState);
  uint64_t getRaw(void);
  static bool validChecksum(const uint64_t state);
  void setSwing(const bool on);
  bool getSwing(void);
  void setSleep(const bool on);
  bool getSleep(void);
  void setTurbo(const bool on);
  bool getTurbo(void);
  void setIon(const bool on);
  bool getIon(void);
  bool isTimeCommand(void);
  bool isOnTimerActive(void);
  void setOnTimerActive(const bool on);
  bool isOffTimerActive(void);
  void setOffTimerActive(const bool on);
  bool isTimerActive(void);
  void setTimerActive(const bool on);
  static uint8_t calcChecksum(const uint64_t state);
  static uint8_t convertMode(const stdAc::opmode_t mode);
  static uint8_t convertFan(const stdAc::fanspeed_t speed);
  static stdAc::opmode_t toCommonMode(const uint8_t mode);
  static stdAc::fanspeed_t toCommonFanSpeed(const uint8_t speed);
  stdAc::state_t toCommon(void);
  String toString(void);
#ifndef UNIT_TEST

 private:
  IRsend _irsend;
#else
  IRsendTest _irsend;
#endif
  uint64_t remote_state;
  uint64_t remote_time_state;
  bool use_time_state;
  void checksum(void);
  void _setTimer(const uint16_t minutes, const uint8_t offset);
  uint16_t _getTimer(const uint8_t offset);
};

#endif  // IR_VESTEL_H_