// Copyright 2017 Jonny Graham
// Copyright 2018-2019 David Conran

/// @file
/// @brief Support for Fujitsu A/C protocols.
/// Fujitsu A/C support added by Jonny Graham

// Supports:
//   Brand: Fujitsu,  Model: AR-RAH2E remote
//   Brand: Fujitsu,  Model: ASYG30LFCA A/C (ARRAH2E)
//   Brand: Fujitsu,  Model: AR-DB1 remote
//   Brand: Fujitsu,  Model: AST9RSGCW A/C (ARDB1)
//   Brand: Fujitsu,  Model: AR-REB1E remote
//   Brand: Fujitsu,  Model: ASYG7LMCA A/C (ARREB1E)
//   Brand: Fujitsu,  Model: AR-RAE1E remote
//   Brand: Fujitsu,  Model: AGTV14LAC A/C
//   Brand: Fujitsu,  Model: AR-RAC1E remote
//   Brand: Fujitsu,  Model: ASTB09LBC A/C
//   Brand: Fujitsu,  Model: AR-RY4 remote
//   Brand: Fujitsu General,  Model: AR-JW2 remote
//   Brand: Fujitsu,  Model: AR-DL10 remote
//   Brand: Fujitsu,  Model: ASU30C1 A/C

#ifndef IR_FUJITSU_H_
#define IR_FUJITSU_H_

#define __STDC_LIMIT_MACROS
#include <stdint.h>
#ifdef ARDUINO
#include <Arduino.h>
#endif
#include "IRrecv.h"
#include "IRremoteESP8266.h"
#include "IRsend.h"
#ifdef UNIT_TEST
#include "IRsend_test.h"
#endif


// Constants
const uint8_t kFujitsuAcModeAuto = 0x00;
const uint8_t kFujitsuAcModeCool = 0x01;
const uint8_t kFujitsuAcModeDry = 0x02;
const uint8_t kFujitsuAcModeFan = 0x03;
const uint8_t kFujitsuAcModeHeat = 0x04;

const uint8_t kFujitsuAcCmdStayOn = 0x00;            // b00000000
const uint8_t kFujitsuAcCmdTurnOn = 0x01;            // b00000001
const uint8_t kFujitsuAcCmdTurnOff = 0x02;           // b00000010
const uint8_t kFujitsuAcCmdEcono = 0x09;             // b00001001
const uint8_t kFujitsuAcCmdPowerful = 0x39;          // b00111001
const uint8_t kFujitsuAcCmdStepVert = 0x6C;          // b01101100
const uint8_t kFujitsuAcCmdToggleSwingVert = 0x6D;   // b01101101
const uint8_t kFujitsuAcCmdStepHoriz = 0x79;         // b01111001
const uint8_t kFujitsuAcCmdToggleSwingHoriz = 0x7A;  // b01111010

const uint8_t kFujitsuAcFanAuto = 0x00;
const uint8_t kFujitsuAcFanHigh = 0x01;
const uint8_t kFujitsuAcFanMed = 0x02;
const uint8_t kFujitsuAcFanLow = 0x03;
const uint8_t kFujitsuAcFanQuiet = 0x04;
const uint8_t kFujitsuAcFanSize = 3;  // Bits

const uint8_t kFujitsuAcMinTemp = 16;  // 16C
const uint8_t kFujitsuAcMaxTemp = 30;  // 30C

const uint8_t kFujitsuAcSwingSize = 2;
const uint8_t kFujitsuAcSwingOff = 0x00;
const uint8_t kFujitsuAcSwingVert = 0x01;
const uint8_t kFujitsuAcSwingHoriz = 0x02;
const uint8_t kFujitsuAcSwingBoth = 0x03;

const uint8_t kFujitsuAcOutsideQuietOffset = 7;
const uint8_t kFujitsuAcCleanOffset = 3;
const uint8_t kFujitsuAcFilterOffset = 3;

// Legacy defines.
#define FUJITSU_AC_MODE_AUTO kFujitsuAcModeAuto
#define FUJITSU_AC_MODE_COOL kFujitsuAcModeCool
#define FUJITSU_AC_MODE_DRY kFujitsuAcModeDry
#define FUJITSU_AC_MODE_FAN kFujitsuAcModeFan
#define FUJITSU_AC_MODE_HEAT kFujitsuAcModeHeat
#define FUJITSU_AC_CMD_STAY_ON kFujitsuAcCmdStayOn
#define FUJITSU_AC_CMD_TURN_ON kFujitsuAcCmdTurnOn
#define FUJITSU_AC_CMD_TURN_OFF kFujitsuAcCmdTurnOff
#define FUJITSU_AC_CMD_STEP_HORIZ kFujitsuAcCmdStepHoriz
#define FUJITSU_AC_CMD_STEP_VERT kFujitsuAcCmdStepVert
#define FUJITSU_AC_FAN_AUTO kFujitsuAcFanAuto
#define FUJITSU_AC_FAN_HIGH kFujitsuAcFanHigh
#define FUJITSU_AC_FAN_MED kFujitsuAcFanMed
#define FUJITSU_AC_FAN_LOW kFujitsuAcFanLow
#define FUJITSU_AC_FAN_QUIET kFujitsuAcFanQuiet
#define FUJITSU_AC_MIN_TEMP kFujitsuAcMinTemp
#define FUJITSU_AC_MAX_TEMP kFujitsuAcMaxTemp
#define FUJITSU_AC_SWING_OFF kFujitsuAcSwingOff
#define FUJITSU_AC_SWING_VERT kFujitsuAcSwingVert
#define FUJITSU_AC_SWING_HORIZ kFujitsuAcSwingHoriz
#define FUJITSU_AC_SWING_BOTH kFujitsuAcSwingBoth

/// Class for handling detailed Fujitsu A/C messages.
class IRFujitsuAC {
 public:
  explicit IRFujitsuAC(const uint16_t pin,
                       const fujitsu_ac_remote_model_t model = ARRAH2E,
                       const bool inverted = false,
                       const bool use_modulation = true);
  void setModel(const fujitsu_ac_remote_model_t model);
  fujitsu_ac_remote_model_t getModel(void);
  void stateReset(void);
#if SEND_FUJITSU_AC
  void send(const uint16_t repeat = kFujitsuAcMinRepeat);
  /// Run the calibration to calculate uSec timing offsets for this platform.
  /// @note This will produce a 65ms IR signal pulse at 38kHz.
  ///   Only ever needs to be run once per object instantiation, if at all.
  int8_t calibrate(void) { return _irsend.calibrate(); }
#endif  // SEND_FUJITSU_AC
  void begin(void);
  void stepHoriz(void);
  void toggleSwingHoriz(const bool update = true);
  void stepVert(void);
  void toggleSwingVert(const bool update = true);
  void setCmd(const uint8_t cmd);
  uint8_t getCmd(const bool raw = false);
  void setTemp(const uint8_t temp);
  uint8_t getTemp(void);
  void setFanSpeed(const uint8_t fan);
  uint8_t getFanSpeed(void);
  void setMode(const uint8_t mode);
  uint8_t getMode(void);
  void setSwing(const uint8_t mode);
  uint8_t getSwing(const bool raw = false);
  uint8_t* getRaw(void);
  bool setRaw(const uint8_t newState[], const uint16_t length);
  uint8_t getStateLength(void);
  static bool validChecksum(uint8_t* state, const uint16_t length);
  void setPower(const bool on);
  void off(void);
  void on(void);
  bool getPower(void);
  void setClean(const bool on);
  bool getClean(const bool raw = false);
  void setFilter(const bool on);
  bool getFilter(const bool raw = false);
  void setOutsideQuiet(const bool on);

  bool getOutsideQuiet(const bool raw = false);

  uint8_t convertMode(const stdAc::opmode_t mode);
  uint8_t convertFan(stdAc::fanspeed_t speed);
  static stdAc::opmode_t toCommonMode(const uint8_t mode);
  static stdAc::fanspeed_t toCommonFanSpeed(const uint8_t speed);
  stdAc::state_t toCommon(void);
  String toString(void);
#ifndef UNIT_TEST

 private:
  IRsend _irsend;  ///< Instance of the IR send class
#else
  /// @cond IGNORE
  IRsendTest _irsend;  ///< Instance of the testing IR send class
  /// @endcond
#endif
  uint8_t remote_state[kFujitsuAcStateLength];  ///< The state of the IR remote.
  uint8_t _temp;
  uint8_t _fanSpeed;
  uint8_t _mode;
  uint8_t _swingMode;
  uint8_t _cmd;
  fujitsu_ac_remote_model_t _model;
  uint8_t _state_length;
  uint8_t _state_length_short;
  bool _outsideQuiet;
  bool _clean;
  bool _filter;
  void buildState(void);
  void buildFromState(const uint16_t length);
};

#endif  // IR_FUJITSU_H_