/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */

//
// Tune Menu
//

#include "../../inc/MarlinConfigPre.h"

#if HAS_LCD_MENU

#include "menu.h"
#include "../../module/motion.h"
#include "../../module/planner.h"
#include "../../module/temperature.h"
#include "../../MarlinCore.h"

#if HAS_LEVELING
  #include "../../feature/bedlevel/bedlevel.h"
#endif

#if ENABLED(SINGLENOZZLE)
  #include "../../module/tool_change.h"
#endif

#if ENABLED(BABYSTEPPING)

  #include "../../feature/babystep.h"
  #include "../lcdprint.h"
  #if HAS_GRAPHICAL_LCD
    #include "../dogm/ultralcd_DOGM.h"
  #endif

  void _lcd_babystep(const AxisEnum axis, PGM_P const msg) {
    if (ui.use_click()) return ui.goto_previous_screen_no_defer();
    if (ui.encoderPosition) {
      const int16_t steps = int16_t(ui.encoderPosition) * (
        #if ENABLED(BABYSTEP_XY)
          axis != Z_AXIS ? BABYSTEP_MULTIPLICATOR_XY :
        #endif
        BABYSTEP_MULTIPLICATOR_Z
      );
      ui.encoderPosition = 0;
      ui.refresh(LCDVIEW_REDRAW_NOW);
      babystep.add_steps(axis, steps);
    }
    if (ui.should_draw()) {
      const float spm = planner.steps_to_mm[axis];
      MenuEditItemBase::draw_edit_screen(msg, BABYSTEP_TO_STR(spm * babystep.accum));
      #if ENABLED(BABYSTEP_DISPLAY_TOTAL)
        const bool in_view = (true
          #if HAS_GRAPHICAL_LCD
            && PAGE_CONTAINS(LCD_PIXEL_HEIGHT - MENU_FONT_HEIGHT, LCD_PIXEL_HEIGHT - 1)
          #endif
        );
        if (in_view) {
          #if HAS_GRAPHICAL_LCD
            ui.set_font(FONT_MENU);
            lcd_moveto(0, LCD_PIXEL_HEIGHT - MENU_FONT_DESCENT);
          #else
            lcd_moveto(0, LCD_HEIGHT - 1);
          #endif
          lcd_put_u8str_P(GET_TEXT(MSG_BABYSTEP_TOTAL));
          lcd_put_wchar(':');
          lcd_put_u8str(BABYSTEP_TO_STR(spm * babystep.axis_total[BS_TOTAL_IND(axis)]));
        }
      #endif
    }
  }

  inline void _lcd_babystep_go(const screenFunc_t screen) {
    ui.goto_screen(screen);
    ui.defer_status_screen();
    babystep.accum = 0;
  }

  #if ENABLED(BABYSTEP_XY)
    void _lcd_babystep_x() { _lcd_babystep(X_AXIS, GET_TEXT(MSG_BABYSTEP_X)); }
    void _lcd_babystep_y() { _lcd_babystep(Y_AXIS, GET_TEXT(MSG_BABYSTEP_Y)); }
  #endif

  #if DISABLED(BABYSTEP_ZPROBE_OFFSET)
    void _lcd_babystep_z() { _lcd_babystep(Z_AXIS, GET_TEXT(MSG_BABYSTEP_Z)); }
    void lcd_babystep_z()  { _lcd_babystep_go(_lcd_babystep_z); }
  #endif

#endif // BABYSTEPPING

void menu_tune() {
  START_MENU();
  BACK_ITEM(MSG_MAIN);

  //
  // Speed:
  //
  EDIT_ITEM(int3, MSG_SPEED, &feedrate_percentage, 10, 999);

  //
  // Manual bed leveling, Bed Z:
  //
  #if BOTH(MESH_BED_LEVELING, LCD_BED_LEVELING)
    EDIT_ITEM(float43, MSG_BED_Z, &mbl.z_offset, -1, 1);
  #endif

  //
  // Nozzle:
  // Nozzle [1-4]:
  //
  #if HOTENDS == 1
    EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - 15, []{ thermalManager.start_watching_hotend(0); });
  #elif HOTENDS > 1
    HOTEND_LOOP()
      EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, heater_maxtemp[e] - 15, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
  #endif

  #if ENABLED(SINGLENOZZLE)
    EDIT_ITEM_FAST(uint16_3, MSG_NOZZLE_STANDBY, &singlenozzle_temp[active_extruder ? 0 : 1], 0, HEATER_0_MAXTEMP - 15);
  #endif

  //
  // Bed:
  //
  #if HAS_HEATED_BED
    EDIT_ITEM_FAST(int3, MSG_BED, &thermalManager.temp_bed.target, 0, BED_MAXTEMP - 10, thermalManager.start_watching_bed);
  #endif

  //
  // Fan Speed:
  //
  #if FAN_COUNT > 0

    auto on_fan_update = []{
      thermalManager.set_fan_speed(MenuItemBase::itemIndex, editable.uint8);
    };

    #if HAS_FAN1 || HAS_FAN2 || HAS_FAN3 || HAS_FAN4 || HAS_FAN5 || HAS_FAN6 || HAS_FAN7
      auto fan_edit_items = [&](const uint8_t f) {
        editable.uint8 = thermalManager.fan_speed[f];
        EDIT_ITEM_FAST_N(percent, f, MSG_FAN_SPEED_N, &editable.uint8, 0, 255, on_fan_update);
        #if ENABLED(EXTRA_FAN_SPEED)
          EDIT_ITEM_FAST_N(percent, f, MSG_EXTRA_FAN_SPEED_N, &thermalManager.new_fan_speed[f], 3, 255);
        #endif
      };
    #endif

    #define SNFAN(N) (ENABLED(SINGLENOZZLE) && !HAS_FAN##N && EXTRUDERS > N)
    #if SNFAN(1) || SNFAN(2) || SNFAN(3) || SNFAN(4) || SNFAN(5) || SNFAN(6) || SNFAN(7)
      auto singlenozzle_item = [&](const uint8_t f) {
        editable.uint8 = thermalManager.fan_speed[f];
        EDIT_ITEM_FAST_N(percent, f, MSG_STORED_FAN_N, &editable.uint8, 0, 255, on_fan_update);
      };
    #endif

    #if HAS_FAN0
      editable.uint8 = thermalManager.fan_speed[0];
      EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_FAN_SPEED, &editable.uint8, 0, 255, on_fan_update);
      #if ENABLED(EXTRA_FAN_SPEED)
        EDIT_ITEM_FAST_N(percent, 0, MSG_FIRST_EXTRA_FAN_SPEED, &thermalManager.new_fan_speed[0], 3, 255);
      #endif
    #endif
    #if HAS_FAN1
      fan_edit_items(1);
    #elif SNFAN(1)
      singlenozzle_item(1);
    #endif
    #if HAS_FAN2
      fan_edit_items(2);
    #elif SNFAN(2)
      singlenozzle_item(1);
    #endif
    #if HAS_FAN3
      fan_edit_items(3);
    #elif SNFAN(3)
      singlenozzle_item(1);
    #endif
    #if HAS_FAN4
      fan_edit_items(4);
    #elif SNFAN(4)
      singlenozzle_item(1);
    #endif
    #if HAS_FAN5
      fan_edit_items(5);
    #elif SNFAN(5)
      singlenozzle_item(1);
    #endif
    #if HAS_FAN6
      fan_edit_items(6);
    #elif SNFAN(6)
      singlenozzle_item(1);
    #endif
    #if HAS_FAN7
      fan_edit_items(7);
    #elif SNFAN(7)
      singlenozzle_item(1);
    #endif

  #endif // FAN_COUNT > 0

  //
  // Flow:
  //
  #if EXTRUDERS
    EDIT_ITEM(int3, MSG_FLOW, &planner.flow_percentage[active_extruder], 10, 999, []{ planner.refresh_e_factor(active_extruder); });
    // Flow En:
    #if EXTRUDERS > 1
      LOOP_L_N(n, EXTRUDERS)
        EDIT_ITEM_N(int3, n, MSG_FLOW_N, &planner.flow_percentage[n], 10, 999, []{ planner.refresh_e_factor(MenuItemBase::itemIndex); });
    #endif
  #endif

  //
  // Advance K:
  //
  #if ENABLED(LIN_ADVANCE) && DISABLED(SLIM_LCD_MENUS)
    #if EXTRUDERS == 1
      EDIT_ITEM(float42_52, MSG_ADVANCE_K, &planner.extruder_advance_K[0], 0, 999);
    #elif EXTRUDERS > 1
      LOOP_L_N(n, EXTRUDERS)
        EDIT_ITEM_N(float42_52, n, MSG_ADVANCE_K_E, &planner.extruder_advance_K[n], 0, 999);
    #endif
  #endif

  //
  // Babystep X:
  // Babystep Y:
  // Babystep Z:
  //
  #if ENABLED(BABYSTEPPING)
    #if ENABLED(BABYSTEP_XY)
      SUBMENU(MSG_BABYSTEP_X, []{ _lcd_babystep_go(_lcd_babystep_x); });
      SUBMENU(MSG_BABYSTEP_Y, []{ _lcd_babystep_go(_lcd_babystep_y); });
    #endif
    #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
      SUBMENU(MSG_ZPROBE_ZOFFSET, lcd_babystep_zoffset);
    #else
      SUBMENU(MSG_BABYSTEP_Z, lcd_babystep_z);
    #endif
  #endif

  END_MENU();
}

#endif // HAS_LCD_MENU